Volkswagen > Phaeton > 2004-2006 Body Exterior 63 ... - Motor-Talk

On the bottom side of the cover, loosen the bolts - 9 - to the wheel housing liner and the clips - 10 - to the noise insulation. In the wheel housing, remove bolts - 4 ...
77KB taille 10 téléchargements 185 vues
Bumper Cover, Removing and Installing

Page 1 of 3

Volkswagen > Phaeton > 2004-2006 Body Exterior 63 - Front Bumper . Bumper Cover, Removing and Installing Removing

Remove the bolts - 2 - .

x-ebahn:///C:/Program%20Files/eBahn/data/VW-D-D1-BD01.ebn/VW/D/D1/Repair%20M...

9/6/2010

Bumper Cover, Removing and Installing

Page 2 of 3

The bolts - 11 - are located under the cover piece Installing .

Cover Piece, Removing and

On the bottom side of the cover, loosen the bolts - 9 - to the wheel housing liner and the clips - 10 - to the noise insulation. In the wheel housing, remove bolts - 4 - and bolt - 6 - , which points upward. Bring the headlamp cleaning system cover into the lock position. Reach the bolt - 3 - through the opening in the wheel housing liner using special tool T 10113 . With a second technician, pull the cover parallel out of the guides. Disconnect the parking assist connector

Electrical Equipment - Repair Group 94

Disconnect any additional connectors from the electrical components.

x-ebahn:///C:/Program%20Files/eBahn/data/VW-D-D1-BD01.ebn/VW/D/D1/Repair%20M...

9/6/2010

Bumper Cover, Removing and Installing

Page 3 of 3

Installing Follow the sequence when tightening the bolts.

Tighten bolt - 3 - first. Then tighten both outer bolts in the group of bolts marked - 2 - , and then the four middle bolts in that group. Next, tighten bolts - 6 - , which point upward in the wheel housing, and bolts - 11 - . After that, there is no specified tightening sequence for the remaining bolts and clips. Copyright © 2008 Volkswagen of America, Inc. and Bentley Publishers. All rights reserved. Last processed:

x-ebahn:///C:/Program%20Files/eBahn/data/VW-D-D1-BD01.ebn/VW/D/D1/Repair%20M...

9/6/2010