3. Put the pre-assembled seat cushion unit over the gas lift (G). Align the hole at center of seat plate of the seat cushion with the top of gas lift (G). Then, press down with even pressure until they are firmly secured to finish the assembly. | 4MM. ·. M. E. Description. Parts List. Quantity. DOD. OT. A. BACK CUSHION. Ð. СÐÐ .
2. Place screws into board rail where the pre-drilled holes are on the pen tray. Tighten with phillips head tip. 3. Check results. If not satisfied, start over from the beginning. Pen Tray. Slide To Center. Of Pen Tray. MOUNTING ... Mesurez 40 mm ver
Draw a line for top and bottom perimeter. Measure down 20mm from the top line of board, and fix two hangers by anchor and screw. 20mm. Measure up 40mm ...
position on work surface as provided - .... For immediate help with assembly or product information call our toll-free ... Please provide the following information: 1.
If you are missing parts or have other concerns, please email [email protected] or fax: 404-472-9063. Please provide the following information: 1. Full Name. 2.
Align with built-in brackets on upper board frame to mark position. Remarque : 2 supports d'accrochage supplémentaires pour le haut sont compris avec les ...
orificio con rosca del otro poste corto sin tornillo. El orificio angosto en rosca es donde se insertarán las patas de plástico en la parte inferior del poste. Repita este paso hasta que haya ensamblado los 4 postes altos. 2. Embone los soportes de
Standing behind the easel with it 1. Tenez-vous derrière le chevalet, in the upright position, grasp the saisissez la barre transversale cross bar (A) of the support.
Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. . Check to be sure that you have all ...
Damaged or missing parts ship from our facility in 1-2 business days. Please provide the ... out the parts on a non-abrasive surface such as carpet or blanket.
Back Cushion - 1 pc. Coussin de dossier - 1 pc. CojÃn del ... Damaged or missing parts ship from our facility in 1-2 business days. Please provide the following ...
... del alcance de los niños. ⢠Se recomienda que dos personas realicen este ensamble. ... las partes en una superficie no abrasiva, como una alfombra o sábana.
Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. ⢠Check to be sure that you have all parts and hardware. · Remove all wrapping materials, including staples and packing straps
Adresse physique - ne donnez pas votre boîte postale car nos livreurs ne peuvent ... No incluya apartado postal debido a que nuestros distribuidores no pueden ...
Insert the back cushion(H) into the slot on seat cushion (G) tightly until it is firmly ... DO NOT RETURN TO STORE. For immediate help with ... Adresse physique – ne pas inclure de boîte postale, car nos porteurs ne peuvent pas livrer à ces ...
45450/45451/45452. Assembly Instructions. STEP 1 o o. If using LLR69612 / LLR69611 / LLR69999 on the left side, put Lock Stopper here. Tightening. Screw *.
Insert the glass board into tray's slot from one side. 2. ... For immediate help with assembly or product information call our toll-free number: 1-888-598-7316 Mon.
Check to be sure that you have all parts and hardware. ⢠Remove all wrapping materials, .... Shows Z-Bracket of Return or Bridge connected to Desk. Leg.
S.P Richards Company warranties upholstery fabric on chairs it distributes under the Lorell® brand name for a period of two (2) years from the date of.
