Sails
Sail Plan, Trisbal 36, an aluminum hull, centerboard, cutter Measurements taken from
Sail Main Grand Voile Genoa # 1 Genois #1 Genoa #2 Genois #2 Yankee Staysail Trinquette Stormsail Spinaker Total Sail area:
Sales Brochure or labeled on drawings are bolded and underlined. Those unbolded and not underlined were measured off a drawing.
Luff
Leach
Foot
LP
Area sq F
m2
37’10”
39’2”
12’8”
----
281
26.11
44’4”
38’11”
22’2”
19’0”
436
40.53
41’6” 38’6”
33’6” 28’8”
19’8” 18’1”
16’1” 342 12’10 260
31.74 24.17
30’10” 26’1”
27’1” 19’8”
10’2” 10’10”
8’11” 7’7”
139 99 915
12.92 9.20 85.00
753 589
70.0 54.7
(from brouchures) (adding main and foretriangle)
Appendix S P 1 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Sail and Rigging Measurements from Drawing - Metric Sail Plan drawing (“Cotre a Derives en Alu”) by P. Vangootsenhoven and J. P.Brouns , P. Marique (consultant) dated 25/04/77, scale 1/20, Plan # “7 / PV 36 / P1 / 2” Saved in a file titles “Plans – sail plan n side view 2” copied form the Trisbal web site. Notes: The lengths of the sheets includes and blocks on deck, the sail or mast. And is the distance from the clew to the deck fitting to the aft of the boat. The distance of the deck fitting for the sheet (turning block) is measured from centre of the mast. The dimensions of shrouds and stays include turnbuckles and any other fittings. The luff, leach and foot dimensions include the cringe., are exterior measurements of the edge of the sail. The tack of the jib/genoa and the staysail tack are 0.19m above the deck. All measurements underlined and bolded were specified on the drawing, all others were measured: Distances between battens was measured along the mainsail’s leach. Reefs on mainsail are measured from the boom up the mast and along the leach. Roach was specified on the foot of the foresails and the leach of the main.
Sail
Mast
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(m)
(m)
(m)
(m)
(m)
(m)
(m)
13.0
Notes and Sail Area
Length includes mast cap
Boom
4.0
Length includes gooseneck. 0.14m high. 1.1m from maststep to centre of boom. 1.28m from top of boom to deck.
Mainsail
P= 11.520 E=
3.860
11.95
3.860
0.410 is 5.5m up
1st:mast:1.7
1st Length= 0.660
leach:1.76 nd
2 : mast:3.3
2.4m from boom 2
nd
Length= 0.800
Appendix S P 2 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Bouchure: 24 sq m
Sails
Sail
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(m)
(m)
(m)
(m)
(m)
(m)
(m)
leach from boom
leach:3.75
2.4m from 1st
rd
3 : mast:5.0
3
rd
Notes and Sail Area
Length= 0.760
from 2nd 4
th
½*P*E:
Length= 0.600 2.4m from 3
22.3 sq m
rd
I= 10.605 J=
Genoa # 1
26.11 sq m
2.4m (2.45m)
leach:4.62
Foretriangle
On Sailplan:
4.568
13.510
11.85
6.75
5.8
0.190
Brochure: 40.53 sq m
½*LP*Luff= 39.2 sq m Genoa # 2
12.660
10.2
6.0
4.9
0.210
Brochure: 31.74 sq m
½*LP*Luff= 31.0 sq m Yankee
11.730
8.75
5.5
3.9
0.250
One reef: 2.0m from tack 1.84m from clew
Appendix S P 3 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Brochure: 24.17 sq m sq m
½*LP*Luff=
Sails
Sail
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(m)
(m)
(m)
(m)
(m)
(m)
(m)
Notes and Sail Area
22.9 sq m Storm Sail
7.960
6.0
3.3
2.3
½*LP*Luff= 9.2 sq m
Staysail
I= 8.80
Foretriangle
J= 3.14
Staysail
9.400
8.25
3.1
Brochure: 12.92 sq m
2.73
½*LP*Luff: 12.8 sq m Brochure: 85.00 sq m
Spinnaker Centre of Effort
Main
Area 26.11 m2. Centred at 3.9 m above the top of the boom, 5.25 m above the deck, 1.34 m aft of the aft end of the mast
Foretriangle
Area 28.63 m2. Centred at 4.7 m above the deck, 1.55 m in front of the front edge of the mast
Sail Plan
Area 54.74 sq.m. Adding main and foretriangle areas. Centred at horizontal, centre of mast, 15’9” meters above deck. Centered on lower shroud mast fitting (for fore and aft shrouds). Area 70 sq.m from brouchure. Length
Rigging
(m) Stays
Forestay
13.86
Distance of attachment on the deck from the Centre of the mast (m) +4.72
Notes
The bottom of the sail (tack) is 0.2m above the deck
Appendix S P 4 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Length
Rigging
(m) Staysail Stay
9.52
Distance of attachment on the deck from the Centre of the mast (m) +3.26
Notes
The bottom of the sail (tack) is 0.3m above the deck. Attached to the mast at 8.91m above thedeck.
Shrouds
Halyards
Aft Stay
14.57
-5.81
Running backstay
9.40
-1.99
Distance from attachment on mast to deck, does not account for blocks and tackle.
Upper
13.35
0.00
Fore and aft centre of mast
Lower- Froward
5.21
0.66
Lower- Aft
5.13
-0.65
Main
25.2
Foresail
26.6
Staysail
18.1
Main sail toping lift
Sheets
25.2
Main
3.64
The lower shroud fitting on mast is 4.8 m from the deck (minus thickness of maststep between the base of the mast and the deck.
Aft end of boom to top of mast to deck at bottom of mast
-4.02
1.53 m from bottom of boom to cockpit coaming. A 4:1 block would requite 6m for this distance. Total length for a main sheet would be 4*1.53 + 4*4.02 + 2.1 ( from deck fitting to aft of boat) = 24.3m mainsheet + extra for distance from coaming to deck
Appendix S P 5 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Length
Rigging
(m)
Distance of attachment on the deck from the Centre of the mast (m)
Notes
which is not visible in the drawing.. Genoa #1
4.7
-3.96
Genoa #2
5.4
-3.96
Yankee
6.6
-3.96
Storm sail
8.3
-0.10
Stay Sail
6.5
-0.10
Miscellaneous Item
Description
Measurement (m)
Heights, on water
Bottom of keel ( board up) to top of superstructure
1.8
Bottom of keel ( board up) to top of tallest pulpit
2.1 bow
At designed waterline
1.9, stern At designed waterline Vertical Clearance
14.7
At designed waterline
Freeboard, bow
1.4
At designed waterline
Freeboard, middle
1.2
At designed waterline
Freeboard, Stern
1.2
At designed waterline
Bottom of keel ( board up) and top of superstructure
2.8
Bottom of keel ( board up) and top of tallest stanchions
2.9
Height of top of mast above water Does not include antennas or lights on mast
Height of boat, on land
Appendix S P 6 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Item
Description
Centre of mast to bow of boat (on deck)
Draft,
Beam
Displacement
Measurement (m) 4.86
Both centerboards up
0.926
0.95
Main centerboard down
2.01
2.05
Main centerboard up, aft board down
1.57
Maximum
3.72 from sail plan and brochure
Maximum at waterline
2.82 from sail plan and brochure
7.3 tons (7,340 kg) or 16,292 lbs
From Builder’s plate in cockpit build 1979
6.6 tons (6,600 kg) or 14,550 lbs
From sail plans and brochures
1.9 tons (1,900 kg) or 4,189 lbs lead ballast
Appendix S P 7 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Propeller Aperture
See Sun Hydraulics drawings dec.2,1986 for part SY-4, title “Prop Aperture”, ref “SATYROS”
JPEG: “D:\Attila\Trisbal 36 Plans\Drawing of propeller aperture n shaft - Sun Hydraulics - Dec 2 1986 of Trisbal 36 built in 1979 – 20130313”
PdF: “D:\Attila\Trisbal 36 Plans \Satyrus - Trisbal 36 built in 1979 - Prop Aperature n shaft - Sun Hydraulics drawing Dec 2 1986 – top half – 20130313” PdF: “D:\Attila\Trisbal 36 Plans \Satyrus - Trisbal 36 built in 1979 - Prop Aperature n shaft - Sun Hydraulics drawing Dec 2 1986 - bottom half – 20130313” - scanned to 2 pages
Centreboards
Main
1.18 m wide, leading edge, at hull, 4.86m aft of bow, Leading edge is at centre of mast
Aft (plans seem to indicate a dager board or a centerboard.)
0.86m wide, leading edge is 2.46m forward of stern. And 2.62m aft of aft end of main centerboard.
Appendix S P 8 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Sail and Rigging Measurements from Drawing - English Sail Plan drawing (“Cotre a Derives en Alu”) by P. Vangootsenhoven and J. P.Brouns , P. Marique (consultant) dated 25/04/77, scale 1/20, Plan # “7 / PV 36 / P1 / 2” Saved in a file titles “Plans – sail plan n side view 2” copied form the Trisbal web site. Notes: The lengths of the sheets includes and blocks on deck, the sail or mast. And is the distance from the clew to the deck fitting to the aft of the boat. The distance of the deck fitting for the sheet (turning block) is measured from centre of the mast. The dimensions of shrouds and stays include turnbuckles and any other fittings. The luff, leach and foot dimensions include the cringe., are exterior measurements. The tack of the jib/genoa and the staysail tack are 0’7” above the deck. All measurements underlined and bolded were specified on the drawing, all others were measured off the drawing. Distances between battens was measured along the mainsail’s leach. Reefs on mainsail are measured from the boom up the mast and along the leach. Roach was specified on the foot of the foresails and the leach of the main.
Sail
Mast
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
42’8”
Notes and Sail Area
Length includes mast cap
Boom
13’1”
Length includes gooseneck. 6” high. 3’7” from maststep to centre of boom. 4’2” from top of boom to deck.
Mainsail
P=37’10” E=12’ 8”
39’2”
12’8”
1’4” is 18’1” up
1st:mast:5’7”
1st Length= 2’2”
leach:5’9” nd
2 :
7’10” from boom nd
2
Length= 2’7”
Appendix S P 9 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Bouchure: 258 sq.ft.
Sails
Sail
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
leach from boom
mast:10’10” leach:12’4” rd
3 : mast: 16’5” leach:15’2”
7’10” from 1st
Notes and Sail Area
On Sailplan: 281 sq.ft.
3rd Length= 2’6” 7’10”(8’0”) from 2nd
½*P*E: 223 sq.ft.
4th Length= 2’0” 7’10” from3rd Foretriangle
I=34’10” J=14’12”
Genoa # 1
44’4”
38’11”
22’2”
19’0”
7’0”
Brochure: 436 sq.ft.
½*LP*Luff= 422 sq.ft. Genoa # 2
41’6”
33’6”
19’8”
16’1”
0’8”
Brochure: 342 sq.ft.
½*LP*Luff= 334 sq.ft Yankee
38’6”
28’8”
18’1”
12’10”
0’10”
One reef: 6’7” from tack 6’0” from clew
Appendix S P 10 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Brochure: 260 sq.ft
½*LP*Luff=
Sails
Sail
Luff
Leach
Foot
LP
Roach
Reefs
Battens
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
(ft.in.)
Notes and Sail Area
246 sq.ft. Storm Sail
26’1”
19’8”
10’10”
7’7”
½*LP*Luff= 99 sq.ft.
Staysail
I=28’11”
Foretriangle
J=10’ 4”
Staysail
30’10’
27’1”
10’2”
8’11”
Brochure: 139 sq.ft.
½*LP*Luff: 137 sq.ft. Brochure: 915 sq.ft.
Spinnaker Centre of Effort
Main
Area 281 sq.ft. Centred at 12’10” above the top of the boom, 17’3” above the deck, 4’5” aft of the aft end of the mast
Foretriangle
Area 308 sq.ft. Centred at 15’5” above the deck, 5’1” in front of the front edge of the mast
Sail Plan
Area 589 sq.ft. Adding main and foretriangle areas. Centred at horizontal, centre of mast, 15’9” meters above deck. Centered on lower shroud mast fitting (for fore and aft shrouds). Area 753 sq.ft from brouchure.
Appendix S P 11 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Length
Rigging
(ft.in.)
Distance of attachment on the deck from the Centre of the mast (ft.in.)
Notes
+ is in forward of centre of mast - is in aft of centre of mast Stays
Forestay
45’6”
+15’6”
The bottom of the sail (tack) is 0’8”above the deck
Staysail Stay
31’3”
+10’8”
The bottom of the sail (tack) is 1’0” above the deck. Attached to the mast at 29’2” above the deck.
Shrouds
Halyards
Aft Stay
47’10”
-19’1”
Running backstay
30’10”
-6’6”
Distance from attachment on mast to deck, does not account for blocks and tackle.
Upper
43’10”
0.00
Fore and aft centre of mast
Lower- Froward
17’1”
+2’2”
Lower- Aft
16’10”
-2’2”
Main
82’8”
Foresail
87’3”
Staysail
59’5”
Main sail toping lift
Sheets
82’8”
Main
11’11”
The lower shroud fitting on mast is 15’9” from the deck (minus thickness of maststep between the base of the mast and the deck.
Aft end of boom to top of mast to deck at bottom of mast
-13’2”
5’0” from bottom of boom to cockpit coaming. A 4:1 block would requite 6m for this distance.
Appendix S P 12 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Length
Rigging
(ft.in.)
Distance of attachment on the deck from the Centre of the mast (ft.in.)
Notes
+ is in forward of centre of mast - is in aft of centre of mast Total length for a main sheet would be 4*5’+ 4*13’2” + 6’11” ( from deck fitting to aft of boat) = 79’9” mainsheet + extra for distance from coaming to deck which is not visible in the drawing.. Genoa #1
15’5”
-13’0”
Genoa #2
17’9”
-13’0”
Yankee
21’8”
-13’0”
Storm sail
27’3”
-0’4”
Stay Sail
21’4”
-0’4”
Miscellaneous
Description
Measurement (ft.in.)
Heights, on water
Bottom of keel ( board up) to top of superstructure
5’11”
Bottom of keel ( board up) to top of tallest pulpit
6’11” bow
At designed waterline
6’ 3” stern At designed waterline Vertical Clearance
48’3”
At designed waterline
Height of top of mast above water Does not include antennas or lights on mast
Height of boat, on land
Freeboard, bow
4’7”
At designed waterline
Freeboard, middle
3’11”
At designed waterline
Freeboard, Stern
3’11”
At designed waterline
Bottom of keel ( board up) and top of superstructure
9’2”
Appendix S P 13 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Description
Measurement (ft.in.)
Bottom of keel ( board up) and top of tallest stanchions
9’6”
Centre of mast to bow of boat (on deck)
Not counting pulpits
15’11”
Draft
Both centerboards up
3’0”
3’1”
Main centerboard down
6’7”
6’9”
Main centerboard up, aft board down
5’2”
Maximum
12’2” from sail plan and brochure
Miscellaneous
Beam
Maximum at waterline
Displacement
9’3” from sail plan and brochure
7.3 tons (7,340 kg) or 16,292 lbs
From Builder’s plate in cockpit build 1979
6.6 tons (6,600 kg) or 14,550 lbs
From sail plans and brochures
1.9 tons (1,900 kg) or 4,189 lbs lead ballast
Propeller Aperture
See Sun Hydraulics drawings dec.2,1986 for part SY-4, title “Prop Aperture”, ref “SATYROS”
JPEG: “D:\Attila\Trisbal 36 Plans\Drawing of propeller aperture n shaft - Sun Hydraulics - Dec 2 1986 of Trisbal 36 built in 1979 – 20130313”
PdF: “D:\Attila\Trisbal 36 Plans \Satyrus - Trisbal 36 built in 1979 - Prop Aperature n shaft - Sun Hydraulics drawing Dec 2 1986 – top half – 20130313” PdF:
“D:\Attila\Trisbal 36 Plans \Satyrus - Trisbal 36 built in 1979 - Prop Aperature n shaft - Sun Hydraulics
Appendix S P 14 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
Sails
Miscellaneous
Description
Measurement (ft.in.)
drawing Dec 2 1986 - bottom half – 20130313” - scanned to 2 pages Centreboards
Main
3’10” wide, leading edge, at hull, 15’11” aft of bow, Leading edge is at centre of mast
Aft (plans seem to indicate a dagger board or a centerboard.)
2’10” wide, leading edge is 8’1” forward of stern. And 8’7” aft of aft end of main centerboard.
Appendix S P 15 of 2 Printed: March 15, 2013 at 12:04 PM Ref: D:\Temp\Trisbal 36 Sail Plan, Rigging Specifications.doc
