T-Balancer bigNG The bigNG can be either installed in a 3.5” bay, in a chassis slot or in a separate acrylic case. Please connect all fans, sensors, power and USB to the unit and install the setup software from the CD.

3.5” bay mounting:

Please mount in a white piece in each corner.

Slot mounting:

Please mount the white pieces onto the board and then fix the metal slot sheet onto the white pieces

Acrylic case:

Please mount the board on the acrylic cover, add the mounting bolts and screw the second cover.

DISCLAIMER: For the installation of the T-Balancer you have to open the PC. If you are not familiar with installing PC-components, please get in contact with a Professional nearby. mCubed is not liable for any damage to your system due to the installation, any shortcut or even loss of data and for any other loss or damage (including indirect or consequential loss, financial loss, loss of profits or loss of use). For all other liabilities not referred to elsewhere in these Terms our liability is limited in damages to the price of the goods. Full terms and conditions can be downloaded from www.mcubed-tech.com/T&C.pdf.

How to connect External LED Digital sensors Analogue sensors External USB

Fans, CCFL or waterpumps

Power Internal USB

RPM to motherboard