CONTENTS Ballasts Lamps Lamp Holders U-Lamp Hardware Wire

HID Lighting Flashers Conduit Fittings Fixtures

Neon Sign Components 40 - 90

Transformers GTO Cable Glass Tubing Electrodes Neon Gas

Housings Tube Supports Processing Equipment LED Systems

Paints / Supplies 92 - 112

Metal Paint Plastic Paint Primers Thinners Spray Mask

Bulletin Enamels Lettering Enamels Spray Guns

Electric Sign Components 4 - 37

Aluminum Materials 114 - 139

Sheet Materials Letter Coil Post and Panel Systems Extrusions

Plastic Sheet / Reels 142 - 146

Standard Acrylics Impact Modified Acrylics Sta-Tuf Polycarbonate

Banners / Flex Face Materials / Letters / Adhesives 148 - 167 Commercial Sign Materials 170 - 183

Tools / Hardware 186 - 194 CAS Supplies and Equipment 196 - 233

Cooley Signtech Vinyl Sign and Awning Substrates

Wagner 3M Panaflex Jewelite Lord Adhesives Banners

MDO Corrugated Plastic Ultra Board Foam Board

PVC Sheets Sign Board Sandmask Sign Frames

Drill Bits Saws Rivets Punches

Welders Wall Irons Notchers

Routers Vinyl Films Edge Cartridges Software Application Plotters Tape & Tools Printers

Index 236-242 REECESUPPLY SUPPLYCOMPANY COMPANY REECE

REECE SUPPLY COMPANY Sign Supplies and Equipment CONDITIONS OF SALE Materials Every effort is made by REECE SUPPLY COMPANY to stock and distribute merchandise of the highest quality for the sign, C.A.S., digital and screen printing industry and to back up all guarantees provided by the manufacturer. Shipment We make a special effort to ship every order the same day it is received. We prepay all shipments $750.00 in value provided shipment is made by motor freight, except as noted being f.o.b. our warehouse or factory. Claims Count the pieces in each shipment immediately upon arrival and check against the freight bill and packing list. Lost or damaged merchandise is the responsibility of the carrier and in case of loss or damage, obtain a notation on the freight bill at time of delivery. The Claim Agent of the delivering carrier must be notified within 24 hours for official inspection. Claim Agent will advise as to the method of filing claim. Prices Prices are of necessity subject to change without notice although every effort is being made to notify you of any changes as soon as possible. Warranties Under no circumstances shall Reece Supply Company be held liable for replacement of any defective products beyond the stated, expressed or implied warranties of the product manufacturers. Also, under no circumstances shall Reece Supply Company be held liable for any cost incurred by the product, whether in warranty or out of warranty, as stated by the product manufacturer. All orders for custom fabricated products shall be accompanied by all instructions required by the product manufacturer in order to insure correctness of the job. Under no circumstances shall Reece Supply Company be liable for the correctness of any custom order. All specifications are subject to change without notice. © COPYRIGHT REECE SUPPLY COMPANY OF DALLAS, INC. 2006 ALL RIGHTS RESERVED

Reece Supply Company was established in 1936 in Dallas, Texas by Charles Reece and primarily served the sign manufacturing industry. Through the years the company has remained a family owned business and has grown to six locations that serve the south and southwestern U.S. from warehouses in Dallas, Houston, San Antonio, El Paso, New Orleans and Atlanta. Today Reece Supply Company serves the CAS, digital printing, electrical sign, and screen printing industries and offers an extensive selection of materials and equipment. Our experienced and knowledgeable sales people are able to offer the products, service and support essential to our customer’s business. Reece Supply Company’s commitment to provide our customers with quality products and unmatched service has been a major factor in our success and will continue in the years ahead. All trademarks are the property of their respective owners.

We accept Visa, MasterCard and American Express.

REECE SUPPLY COMPANY

2

CONTENTS

Electric Sign Components

Neon Sign Components

Paints / Supplies

Aluminum Materials

Plastic Sheet / Reels

Banners / Flex Face Materials / Letters / Adhesives

Commercial Sign Materials

Tools / Hardware

CAS Supplies and Equipment

Ballasts Lamps Lamp Holders U-Lamp Hardware Wire

HID Lighting Flashers Conduit Fittings Fixtures

Transformers GTO Cable Glass Tubing Electrodes Neon Gas

Housings Tube Supports Processing Equipment LED Systems

Metal Paint Plastic Paint Primers Thinners Spray Mask

Bulletin Enamels Lettering Enamels Spray Guns

Sheet Materials Letter Coil Post and Panel Systems Extrusions

Standard Acrylics Impact Modified Acrylics Sta-Tuf Polycarbonate Cooley Signtech Vinyl Sign and Awning Substrates

Wagner 3M Panaflex Jewelite Lord Adhesives Banners

MDO Corrugated Plastic Ultra Board Foam Board

PVC Sheets Sign Board Sandmask Sign Frames

Drill Bits Saws Rivets Punches

Welders Wall Irons Notchers

Routers Vinyl Films Edge Cartridges Software Application Plotters Tape & Tools Printers

Index

3

REECESUPPLY SUPPLYCOMPANY COMPANY REECE

ELECTRIC SIGN COMPONENTS

Sign Ballasts

PLASTIC SIGN BALLAST CROSS REFERENCE Allanson

Universal™ Lighting

# Lamps 1-2 2-3-4 2-3-4

Range in Ft. 4-12 8-16 16-24

Catalog # 272AT 448AT 472AT

# Lamps 1-2 2-3-4 2-3-4

Range in Ft. 4-12 8-16 10-24

Catalog # 256-272 256-448-100 256-472

2-3-4

24-32 496AT

2-3-4

16-32

256-496-100

4-5-6 4-5-6

8-24 648AT 24-36 672AT

6 4-5-6

10-25 20-36

256-648 256-672

4-5-6

30-48 696AT

4-5-6

20-48

256-696

REECE SUPPLY COMPANY

4

France

Advance

# Lamps 1-2 4 2-3-4 2 3-4 3

Range in Ft. 4-12 8-16 16-24 16-24 20-32 26-36

Catalog # 268D 448D 468D 2128D 488D 3128D

4-54-5-6 4-5-6

20-30 24-36 36-48

568D 668D 688D

# Range Catalog Lamps in Ft. # 1-2 4-12 ASB-0412-12 2-3-4 6-20 ASB-1224-24 2-3-4 12-24 ASB-1224-24 2-3-4 20-40

ASB-2040-24

4-5-6 12-40 4-5-6 12-48

ASB-1240-46 ASB-1240-46

4-5-6 24-48

ASB-2448-46

ELECTRIC SIGN COMPONENTS

Ballasts Universal™ Lighting Technologies, Plastic Sign High Output Ballasts ballasts Provide ultra-reliable, low-temperature starting as low as -20°F. Supports 1 to 6 lamps. Ideal for rugged outdoor sign cabinet applications. High output 800mA RS Lamps - 120 Volts - 60 Hz. Catalog No.

Lamp Footage

Open Circuit Volts

Max. Line Current

Max. Input Watts

0.55

65

0.90 1.35 1.80

105 160 210

1.35 2.00 2.70 3.50

160 240 325 395

1.90 2.40 2.70 3.50 3.50 4.40

220 285 325 420 420 520

3.00 4.00 5.00

340 480 600

1.70

440

Single Lamp Ballast 256-148-000* 2’ min. - 5’4” max. 400 Two Lamp Ballasts 256-248-000 4’ min. - 8’ max. 400 256-272-000 4’ min. - 12’ max. 500 256-296-000 12’ min. - 16’ max. 500 Three Lamp Ballasts 256-348-000 4’ min. - 12’ max. 500 256-372-100 12’ min. - 18’ max. 590 256-396-100 10’ min. - 24’ max. 720 256-3120-100 16’ min. - 30’ max. 885 Four Lamp Ballasts 256-448-100 8’ min. - 16’ max. 590 256-464-000 10’ min. - 22’ max. 680 256-472-100 10’ min. - 24’ max. 720 256-484-100 16’ min. - 28’ max. 950 256-496-100 16’ min. - 32’ max. 950 256-4120-000 20’ min. - 40’ max. 720 Six Lamp Ballasts 256-648-000 10’ min. - 26’ max. 825 256-672-000 20’ min. - 36’ max. 720 256-696-000 20’ min. - 48’ max. 720 277 Volts - Four Lamp Ballasts 256-1588-000 20’ min. - 32’ max. 900 *0°F min. start temperature for 5’ and 5’4” lamps.

Universal™ Lighting Technologies, MSB -3 Ballasts3

Universal Lighting Technologies, Plastic Sign High Output Ballasts

ballasts plac

Cover most applications (1-6 lamps, 2 to 48 ft.). Thermally protected (UL Class P). Start Temp. -20°. Low watt loss steel lamination and all copper coils for high performance. Ideal for sign maintenance. MSB - Plastic Sign Ballasts High Output 800mA RS Lamps - 120 Volts - 60 Hz. Catalog No.

Lamp Footage

Six Lamp Ballasts 2’ min. - 18’ max. MSB-218-816 MSB-1232-816 12’ min. - 32’ max. MSB-1048-816 10’ min. - 48’ max.

Open Circuit Volts

Max. Line Current

Max. Input Watts

625 970 800

2.00 3.50 570

240 410 570

5

Universal Lighting Technologies, MSB 3 Ballasts

REECE SUPPLY COMPANY

ELECTRIC SIGN COMPONENTS

Ballasts Universal™ Lighting Technologies, Weatherproof Rapid-Start Ballasts Two Lamp only. Sealed with epoxy for complete weather protection. Designed to mount outside the sign enclosure. Starting Temp. -20°F. 120 Volts, - 60Hz. Catalog No. Two Lamp Ballast 257-331-000 Two Lamp Ballast 257-371-000

Lamp Footage

Open Circuit Volts

Max. Line Current

Max. Input Watts

530

1.95

234

530

3.50

440

- 800mA 12’ min. - 16’ max. - 1500mA 12’ min. - 16’ max.

Advance, Ballasts for 800mA. High Output Rapid Start Lamps 120 Volts, 60Hz (Min. Starting Temp. - 20°F)

Advance, Ballast for High Output Rapid Start Lamps

REECE SUPPLY COMPANY

Lamp Footage No. of Lamps Min. Max. Catalog No. Amps Watts Volts 1,2 4 12 ASB-0412-12-BL 1.65 185 480 2,3,4 6 20 ASB-0620-24-BL 2.5 300 590 2,3,4 12 24 ASB-1224-24-BL 2.8 320 785 2,3,4 20* 40* ASB-2040-24-BL 3.9 450 600 4,5,6 12** 40** ASB-1240-46-BL 3.9 450 600 4,5,6 24*** 48*** ASB-2448-46-BL 5.3 610 700 *Total lamp length of each circuit (A) and (B) must not be less than 10 Ft. nor more than 20 ft. Circuit (A) is comprised of lamps 1,2. Circuit (B) is comprised to lamps 3,4. **Total lamp length of each circuit (A) and (B) must not be less than 6 ft. nor more than 20 ft. Circuit (A) is compressed of lamps 1,2,3. Circuit (B) is comprised of lamps 4,5,6. ***Total lamps length on each circuit (A) and (B) must not be less than 12 ft. nor than 24 ft. Circuit (A) is comprised of lamps 1,2,3. Circuit (B) is comprised of lamps 4,5,6.

6

ELECTRIC SIGN COMPONENTS

Ballasts France, Ballasts For High Output 800 M.A. Rapid Start Lamps Lamp Footage Input Max. Line Line Catalog No. Min. Max. Voltage Volts 60Hz Amps One Lamp 2 6 390 120 1.20 168 DR 268 KR 4 12 500 277 0.55 288 KR 8 16 550 277 0.77 Two Lamps 288 DR 8 16 530 120 1.80 2128 DR 16 24 720 120 2.20 388 DR 16 24 720 120 2.70 458 DR 8 20 590 120 2.30 268 KR 4 12 500 277 0.55 288 KR 8 16 550 277 0.77 2128 KR 16 24 720 277 0.90 388 KR 16 24 720 277 1.10 448 KR 6 16 550 277 0.80 458 KR 8 18 590 277 0.95 468 KR 16 24 720 277 1.10 Three Lamps 348 DR 6 12 500 120 1.40 368 DR 12 18 590 120 2.00 388 DR 16 24 720 120 2.70 3128 DR 26 36 1000 120 3.60 458 DR 8 20 590 120 2.30 588 DR 16* 40* 720 120 4.00 368 KR 8 18 590 277 0.86 388 KR 16 24 720 277 1.10 448 KR 6 16 550 277 0.80 458 KR 8 18 590 277 0.95 468 KR 16 24 720 277 1.10 488 KR 20 32 940 277 1.40 588 KR 16 40 720 277 1.70 Four Lamps 458 DR 8 20 590 120 2.30 4128 DR 36* 48* 720 120 3.90 900 120 3.20 30 20 568 DR 588 DR 16* 40* 720 120 4.00 448 KR 6 16 550 277 0.80 458 KR 8 18 590 277 0.95 468 KR 16 24 720 277 1.10 32 940 277 1.40 20 488 KR 4128 KR 36* 48* 720 277 1.70 568 KR 20 30 900 277 1.50 588 KR 16* 40* 720 277 1.70 277 1.70 1000 36 24 668 KR 688 KR 36* 48* 720 277 1.75 Five Lamps 568 DR 20 30 900 120 3.20 588 DR 16* 40* 720 120 4.00 20 30 900 277 1.50 568 KR 588 KR 16* 40* 720 277 1.70 668 KR 24 36 1000 277 1.70 688 KR 36* 48* 720 277 1.75 Six Lamps 668 KR 24 36 1000 277 1.70 688 KR 36* 48* 720 277 1.75 *For ballasts having multi-lamp capacity, consult wiring diagram for installation.

7

France, HO Sign Ballasts

REECE SUPPLY COMPANY

ELECTRIC SIGN COMPONENTS

Ballasts France, DR Series Sign Man’s Six •All units thermally protected. •Only 2 footprints (small and medium). •Six units for 2 to 48 foot flexibility. •Standard wiring configuration with extra long lead wires. •Cold weather starting power. Ballast Selections Table for High Output Rapid Start Lamps.

France, Sign Man’s Six

Lamp Footage Open Circuit Max. Line Line Catalog No. Min. Max. Voltage Volts 60Hz Amps One Lamp 268 DR 4 12 500 120 1.20 Two Lamp 268 DR 2 12 500 120 1.20 448 DR 6 16 550 120 2.00 468 DR 16 24 720 120 2.80 Three Lamp 448 DR 6 16 550 120 2.00 468 DR 16 24 720 120 2.80 488 DR 20 32 940 120 3.20 Four Lamp 448 DR 6 16 550 120 2.00 468 DR 16 24 720 120 2.80 488 DR 20 32 940 120 3.20 668 DR 24 36 1000 120 4.05 688 DR 36* 48* 720 120 5.00 Five Lamp 668 DR 24 36 1000 120 4.05 688 DR 36* 48* 720 120 5.00 Six Lamp 668 DR 24 36 1000 120 4.05 688 DR 36* 48* 720 120 5.00 *For ballasts having multi-lamp capacity, consult wiring diagram for installation.

France, Ballasts 425mA Slimline Lamps Catalog No. 2594D 464D

REECE SUPPLY COMPANY

8

Volts 120 120

Line Amps 2 2

Volts Open Circuit 590 700

ELECTRIC SIGN COMPONENTS

Ballasts Allanson, Ballasts Minimum Starting Temperature is -20°F (-29°C). High Output 800mA RS Lamps 120/277/347 Primary Voltages - 60 Hertz. Line Input Open Circuit Catalog No Lamp Footage Amps Watts Volts Single Lamp 148-AT 2’ Min. - 4’ Max. 0.70 65 330 148-BT 2’ Min. - 4’ Max. 0.80 65 330 272-AT or BT 4’ Min. - 12’ Max. 1.60 190 475 348-AT or BT 6’ Min. - 12’ Max 1.50 162 530 Two Lamp 272-AT or BT 4’ Min. - 12’ Max. 1.60 190 475 296-AT or BT 12’ Min. - 16’ Max. 2.00 222 530 348-AT or BT 6’ Min. - 12’ Max. 1.50 162 530 372-AT or BT 12’ Min. - 18’ Max. 2.00 250 720 396-AT or BT 18’ Min. - 24’ Max. 2.70 298 720 448-AT or BT 8’ Min. - 16’ Max. 1.90 235 575 472-AT or BT 16’ Min - 24’ Max. 2.80 312 720 4120-AT or BT 20’ Min. - 40’ Max. 3.80 455 2X800 Three Lamp 348-AT or BT 6’ Min.- 12’ Max. 1.50 162 530 372-AT or BT 12’ Min. - 18’ Max. 2.00 250 720 396-AT or BT 18’ Min. - 24’ Max. 2.70 298 720 448-AT or BT 8’ Min. - 16’ Max. 1.90 235 575 472-AT or BT 16’ Min. - 24’ Max. 2.80 312 720 496-AT or BT 24’ Min. - 32’ Max. 3.30 375 1000 4120-AT or BT 20’ Min. - 40’ Max. 3.80 455 2X800 Four Lamp 448-AT or BT 8’ Min. - 16’ Max. 1.98 235 578 472-AT or BT 16’ Min. - 24’ Max. 2.90 312 724 496-AT or BT 24’ Min. - 32’ Max. 3.43 375 982 4120-AT or BT 20’ Min. - 40’ Max. 3.81 455 2x790 572-AT or BT 20’ Min. - 30’ Max. 3.40 365 982 648-AT or BT 8’ Min. - 24’ Max. 2.80 320 850 672-AT or BT 24’ Min. - 36’ Max. 4.40 470 1000 696-AT or BT 30’ Min. - 48’ Max. 4.50 510 2x790 Five Lamp 572-AT or BT 20’ Min. - 30’ Max. 3.40 365 982 648-AT or BT 8’ Min. - 24’ Max. 2.80 320 850 672-AT or BT 24’ Min. - 36’ Max. 4.40 470 1000 4.50 510 2X790 30’ Min. - 48’ Max. 696-AT or BT Six Lamp 648-AT or BT 8’ Min. - 24’ Max. 2.80 320 850 24’ Min. - 36’ Max. 4.40 470 1000 672-AT or BT 696-AT or BT 30’ Min. - 48’ Max. 4.50 510 2x790 AT - standard high output fluorescent with thermal protection, Class “P” outdoor Type II non-weatherproof. UNI-Ballast BT - high output fluorescent with integral junction boxes and thermal protection, Class “P” outdoor Type II non-weatherproof.

9

Allanson, Ballasts

REECE SUPPLY COMPANY

ELECTRIC SIGN COMPONENTS

Ballasts Lighting Components, Electronic Ballasts Energy saving, lightweight electronic outdoor sign ballasts that operate one to six 800mA lamps from 2 to 48 feet in length with just three ballasts. EESB Electronic Ballasts vs. Magnetic Ballasts. Power consumption is 40% less than a comparable magnetic ballast. Lowest starting temperature (-30 °F) and the lowest case operating temperature. Total harmonic distortion less than 10%. Operates at line voltages of 70V - 135V.

Lighting Components, Electronic Ballasts

EESB Series Ballast 800 mA High Output Rapid Start Lamps, 120Volts, 50/60Hz (Min. start temp-30°F). Electronic Ballasts Max. Max Open No. of Footage Line Input Circuit Lamps Min. Max. Catalog Number Amps Watts Volts 4 24 EESB-424-13L 1.1 134 750 1,3 1,6 8 32 EESB-832-16L 1.7 198 600 1,4 10 40 EESB-1040-14L 2.4 305 750 2,6 10 48 EESB-1048-26L 2.5 292 700 EESB Multi-Voltage Ballast provide even greater flexibility. Ballast for 800 mA High Output Rapid Start Lamps, 208/220/240/277/347 50/60Hz (Min. start temp-30°F). Electronic Ballasts Max Max No. of Footage Line Input Lamps Min. Max. Catalog Number Amps Watts 208V-.7 146 1,3 4 24 EESB-424-13MV 240V-6 146 277V-.53 146 347V-.44 146 208V-1.05 216 1,6 8 32 EESB-832-16MV 240V-.9 216 277V-.8 216 347V-.64 214 208V-1.48 332 1,4 10 40 EESB-1040-14MV 240V-1.27 331 277V-1.1 329 347V-.9 328 208V-1.51 316 313 2,6 10 48 EESB-1048-26MV 240V-.99 277V-.99 313 347V-.99 312

Volts, Open Circuit Volts 600

800

825

825

Universal Lighting Technologies, Signa® Electronic Sign Ballasts T12 Rapid Start HO Lamps, 108 to 305 Volts, 50/60 Hz

PostScriptPicture

• Universal input voltage • Simplifies wiring • Light output comparable to magnetic sign ballasts • Arc Detection circuit prevents arcing in lamp sockets • Three units cover applications from 1 to 6 lamps, 6’ to 48’ • Cold temperature starting down to -20˚F

38.eps

REECE SUPPLY COMPANY

Catalog No. ESB296IUNV

No. of Lamps 1 or 2

Total Lamp footage Min Max 6 16

ESB496IUNV

2,3 or 4

12

32

ESB696IUNV

4,5 or 6

20

48

10

Input Voltage 120 277 120 277 120 277

Max. Input Watts 160 155 307 294 476 458

Max. Line Current 1.3 0.6 2.6 1.1 4.0 1.7

ELECTRIC SIGN COMPONENTS

Ballasts Advance signPRO® Electronic Sign Ballasts For T12/HO Rapid Start Lamps, 120 Volts, 60 Hz (min. starting temp. -20˚F • Energy savings alternative to magnetic ballasts • Three ballasts cover over 200 different lamp combinations • Same mounting & wiring as magnetic Max. Max. Open No. Lamp footage Line Input Circuit of Lamps Min Max Catalog No. Current Watts Volts 1,2 4 6 ASB-0416-12-E 1.50 175 750 2,3,4 12* 32* ASB-1232-24-E 2.95 350 750 4,5,6 20** 48** ASB-2048-46-E 4.10 480 800 *Total lamp length of each circuit (A) & (B) must not be less than 6’ nor more than 16’. Circuit (A) is compromised of lamps 1,2. Circuit (B) is compromised of lamps 3,4. **Total lamp length of each circuit (A) & (B) must not be less than 10’ nor more than 24’. Circuit (A) is compromised of lamps 1,2,3. Circuit (B) is compromised of lamps 4,5,6.

Fluorescent Lamps High Output Lamps - 800 M.A. •High light output and long life. •Produces about 45% more initial lumens than slimline lamps of same size. Nominal Catalog Number Watts Lumens Std. Ctn F18T12 - CW- HO Cool White 25 1000 24 F24T12 - CW- HO Cool White 32 1640 30 F24T12 - D - HO Daylight 32 1380 30 F24T12 - DSGN - HO Design White 32 1275 30 F30T12 - CW - HO Cool White 42 2250 30 F30T12 - D - HO Daylight 42 2000 30 F36T12 - CW - HO Cool White 44 2850 30 F36T12 - D - HO Daylight 44 2300 30 F36T12 - DSGN - HO Design White 44 2100 30 F42T12 - CW - HO Cool White 51 3500 30 F42T12 - D - HO Daylight 51 2750 30 F48T12 - CW - HO Cool White 60 4150 30 60 3400 30 F48T12 - D - HO Daylight 30 3100 60 F48T12 - DSGN- HO Design White F60T12 - CW- HO Cool White 70 5450 30 F60T12 - D - HO Daylight 70 4450 30 30 4100 70 F60T12 - DSGN - HO Design White F64T12 - CW - HO Cool White 76 5700 30 30 4850 76 F64T12 - D -HO Daylight F64T12 - DSGN -HO Design White 76 4350 30 F72T12 - CW - HO Cool White 85 6400 15 85 5300 15 F72T12 - D - HO Daylight 15 4500 85 F72T12 - DSGN - HO Design White F84T12 - CW - HO Cool White 95 7950 15 F84T12 - D - HO Daylight 95 6700 15 15 5900 95 F84T12 - DSGN - HO Design White F96T12 - CW - HO Cool White 105 9500 15 15 7800 105 F96T12 - D - HO Daylight F96T12 - DSGN HO - Design White 105 7140 15 The F24 to F42 have approximately 9,000 hours lamp life; all others have approximately 12,000 hours lamp life. Fluorescent lamps lumens ratings are approximate because the initial light output is variable from lamp to lamp. These lamps lessen in light output as they age.

11

High Output Lamps

REECE SUPPLY COMPANY

ELECTRIC SIGN COMPONENTS

Fluorescent Lamps Very High Output (VHO) Lamps - 1500 M.A.

Very High Output (VHO)Lamps

Recessed Double Contact Base Catalog Number Watts Lumens Std. Ctn. F48T12 - CW - VHO Cool White 110 7150 30 F48T12 - D - VHO Daylight 110 6000 30 160 12000 15 F72T12 - CW - VHO Cool White F72T12 - D - VHO Daylight 160 9900 15 F96T12 - CW -VHO Cool White 215 16000 15 F96T12 - D -VHO Daylight 215 13600 15 All very high output lamps are rated for approximately 12,000 hours of life.

Slimline Single Pin Lamps

Slimline Single Pin Lamps

Lamp Order Number Watts Lumens Std. Ctn. F24T12 - CW - Cool White 21 1150 30 F36T12 - CW - Cool White 30 2050 30 F42T12 - CW - Cool White 36 2500 30 F48T12 - CW - Cool White 39 2940 30 F48T12 - D - Daylight 39 2500 30 F60T12 - CW - Cool White 50 3500 30 F60T12 - D - Daylight 50 3000 30 F64T12 - CW - Cool White 52 3850 30 F64T12 - D - Daylight 52 3250 30 F72T12 - CW - Cool White 55 4550 15 F72T12 - D - Daylight 55 3800 15 F84T12 - CW - Cool White 70 5300 15 F84T12 - D - Daylight 70 4300 15 F96T12 - CW - Cool White 75 6300 15 F96T12 - D - Daylight 75 5250 15 The F48 has approximately 9,000 hours lamp life and all other slimlines have approximately 12,000 hours lamp life.

EGL, High Output Lamps Big Boy™ High output lamps that can be used any time you can avoid using two shorter lamps of equal length. By reducing the number of lamp ends (lumen losses) more light per foot is achieved without unsightly center raceway shadows and with reduced labor and material costs: fewer ballasts, fewer sockets and much less wiring. They can be used as you would any other straight high output lamp. All sign ballast makers supply ballast that carry up to four lamps, 9, 9 3/4 or 10 feet. Standard colors are Coolwhite and Daylight. Three sizes in T12 diameters: F108, F117, F120.

Color

EGL, High Output Lamps

REECE SUPPLY COMPANY

Cool White Cool White Cool White Daylight Daylight Daylight

12

9, 9 3/4 and 10-Foot High-Output Lamps Lamp Length Socket Lamp Code to Socket Watts 124 105-3/16” 108T12HO/CW 117T12HO/CW 114-3/16” 135 138 117-3/16” 120T12HO/CW 124 105-3/16” 108T12HO/D 135 114-3/16” 117T12HO/D 120T12HO/D 117-3/16” 138

Std/ Pkg. 12 12 12 12 12 12

ELECTRIC SIGN COMPONENTS

Fluorescent Lamps Voltarc®, TUFBEND® Lamps U-Lamps 6” & 9” Leg Spacing. Available in Cool White, Daylight and Sign White. Tufbend FTU9-96T12-CW/HO/CT, FTU9-96T12-D/HO/CT, and FTU696T12-D/HO/CT lamps are specifically designed for use in cold temperature applications and will perform satisfactorily on existing ballasts at cold temperatures (