SG610 - Imitation Indoor / Outdoor Surveillance Camera - Lorex

Imitation Indoor / Outdoor Surveillance Camera. Screw & Anchor Pack. Imitation Camera with Stand. The Lorex Imitation Surveillance Camera is an affordable ...
273KB taille 6 téléchargements 281 vues
MODEL SG610 Imitation Indoor / Outdoor Surveillance Camera English Version 1.0

THIS PACKAGE CONTAINS: 1 x Imitation Camera 1 x Screw and Anchor Pack

FEATURES • Realistic Imitation CCTV Surveillance Bullet Camera • Uses Genuine Metal Camera Body • Ideal For Indoor/Outdoor Use Imitation Camera with Stand

Screw & Anchor Pack

The Lorex Imitation Surveillance Camera is an affordable and effective theft deterrent device. It looks like a real surveillance camera with imitation lens and imitation infrared LEDs. Mount the Imitation Surveillance Camera in a visible area on a ceiling or wall to deter possible thieves and intruders.

INSTALLING THE IMITATION SURVEILLANCE CAMERA 1. Installing the Camera: • The Camera and short cable are firmly attached to the base.

1. Camera

• Drill 1 inch holes in the marked positions for the 3 screw holes. • If necessary, insert the supplied drywall anchors into the screw holes. • Insert a 1 inch screw (provided) through each of the three (3) screw holes in the mounting base plate and into the mounting surface, then tighten the screws. 2. Position the camera by loosening the thumbscrew, moving the camera to the desired angle, and securing the thumbscrew to hold the camera position. CAMERA CARE: Handle the Imitation Surveillance Camera carefully; do not drop it. Wipe the camera with a damp cloth occasionally to keep it looking new

SPECIFICATIONS Weight

0.45 lbs / 0.21 kg

Dimensions: (W x H x D )

2.1“ x 3.6”x ” x 4” 53mm x 90mm x 100mm

2.

Ceiling / Wall

MODELO SG610

MODÈLE SG610 Caméra de Surveillance d'Imitation intérieure/extérieur

Version Francais 1.0

Cámara de imitación para vigilancia para interiores/exteriores

Version Espanol 1.0

CE PAQUET CONTIENT :

ESTE PAQUETE CONTIENE: 1 x Cámara de imitación 1 x Paquete con tornillo y expander

1 x caméra d'imitation 1 x Vis et Paquet D'ancrage

CARACTÉRISTIQUES Caméra d’Imitation avec support

Paquet D'ancrage

• Caméra a balle de Surveillance CCTV d'imitation réel • Utilise le Vrai couvercle de caméra en métal • l'Idéal Pour l'Utilisation intérieur/extérieur

La caméra de surveillance d'imitation Lorex est abordable et un appareil efficace décourageant le vol . Il ressemble à une caméra de surveillance réel avec la lentille artificielle et Infra LED d’imitation. Montez la caméra de Surveillance Artificiel dans une région visible sur un mur pour dissuader des voleurs possibles et des intrus.

INSTALLATION DE LA CAMÉRA DE SURVEILLANCE D'IMITATION 1. Installation de la caméra : ƒLa caméra et le câble court sont attachés fermement à la base. ƒ Percez des trous de 1 pouce dans les positions marquées pour les 3 trous de vis. ƒ Si nécessaire, insérez les ancres de drywall fournies dans les trous de vis. ƒ Insérez une vis de 1 pouce (fournie) par chacun des trois (3) trous de vis dans la plaque de fond montante et dans la surface montante, serrez ensuite les vis. 2. Placer la caméra en desserrant la vis , en déplaçant la caméra à l'angle désiré et en serrant le vis pour tenir la position de la caméra.

Paquete con tornillo y expander

Cámara de imitación con soporte

• Imitación real de una cámara tipo bala de vigilancia de CCTV • Utiliza cuerpo metálico genuíno para la cámara • Ideal para uso en interiores /exteriores

La cámara de vigilancia de imitación de Lorex es un dispositivo económico y eficaz para impedir el hurto. Parecen cámaras de vigilancia verdaderas con la lente de imitación y la cubierta real de CCTV. Monte las cámaras de vigilancia de imitación en un área visible en una pared para disuadir posibles ladrones e intrusos

INSTALANDO LA CAMARA DE IMITACION PARA VIGILANCIA 1. Instalando el soporte de la cámara :

1. Caméra

Plafond/Mur

2.

1. Cámara

ƒHagan un hueco de 1 pulgada de hondo en las posiciones marcadas para los 3 huecos de los tornillos. ƒSi es necesario , inserte los expanders suplidos en la pared de los huecos. ƒInserte un tornillo de 1 pulgada (incluído) en cada uno de los tres (3) huecos en el soporte de la cámara y enl a superficie , soque luego los tornillos. 2. Coloque la cámara fotográfica aflojando el tornillo de apriete manual, moviendo la cámara fotográfica al ángulo deseado, y asegurando el tornillo de apriete manual para llevar a cabo la posición de la cámara fotográfica.

Cielorazo/pared

2.

Soin de la Caméra: Manipulez la caméra de Surveillance Artificiel soigneusement; ne le laissez pas tomber. Essuyez la caméra avec un tissu humide de temps à autre pour la garder semblant neuve

CUIDADO DE LA CAMARA: Maneje la cámara de imitación para vigilancia cuidadosamente; no la deje caer. Límpiela con un trapo de ves en cuando para que luzca como nueva

SPÉCIFICATIONS

ESPECIFICACIONES

Poids

0.45 livres / 0.21 kilos

Dimensions: (L x H x P )

2.1“ x 3.6”x ” x 4” 53 mm x 90 mm x 100 mm

Visitez WWW.lorexcctv.com LOREX Technology Inc. Copyright@ 2007 LOREX Technology Inc. Comme nos produits sont sujet d'amélioration continue, LOREX et ses filiales réserve le droit pour modifier la conception de produit, les spécifications et les prix, sans la notification et sans contractant des obligations. E&OE

Peso

0.45 lbs / 0.21 kg

Dimensiones: (An xA x F )

2.1“ x 3.6”x ” x 4” 53mm x 90mm x 100mm