Samsung SGH-X450 Teardown

To take the LCD display out of the case, click the upper case open with a small flathead screwdriver or case opener. Under the two pads under the LCD Display ...
5MB taille 7 téléchargements 451 vues
Samsung SGH-X450 Teardown

Samsung SGH-X450 Teardown Rédigé par: Bryan

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 6

Samsung SGH-X450 Teardown

OUTILS: Phillips #0 Screwdriver (1) Flathead 3/32" or 2.5 mm Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 6

Samsung SGH-X450 Teardown

Étape 1 — Samsung SGH-X450 Teardown 

Take out the battery and SIM Card.



Remove these screws.

Étape 2

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 6

Samsung SGH-X450 Teardown

Étape 3 

If the screws are removed, you can take the case of with your fingers or a small flathead screwdriver



Now you see the PCB



Agere TR09WQTEF2B Processor



Agere PSC2106 Power Management IC



Battery contacts and power supply connector



SIM Card Slot



Back-Up battery



Antenna connector



2,5mm Headphone Jack

Étape 4

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 6

Samsung SGH-X450 Teardown

Étape 5

 LCD Dispaly cable, you can release this connector with a small flathead screwdriver 

Be careful here, You can break the flatcable!

Étape 6



To take the LCD display out of the case, click the upper case open with a small flathead screwdriver or case opener. Under the two pads under the LCD Display are 2 screws.

 Be also careful here, go not to far with the screwdriver so you can not damage the LCD display.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 5 de 6

Samsung SGH-X450 Teardown

Étape 7 

Now you see this.



If you want to remove the LCD display, lift the PCB of the LCD display up with a small flathead screwdriver.



Finished!

Étape 8

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-09-18 05:56:36 AM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 6 de 6