SAG = No load - Sagshok

How ?? Orange Measure Ring. Red Screw for « Zéro » adjustement. Double scale in cm / inch. SAGSHOK. Page 4. More explanations … • In five minutes, with ...
1MB taille 0 téléchargements 255 vues
SAGSHOK

SAGSHOK

What’s that ?? • This tool permits to measure easily and precisely the SAG of all bikes with a : – LEFTY HEADSHOK CANNONDALE

• The SAG is the distance the fork compresses when you sit on the bike with your static weight.

SAGSHOK

How ?? Red Screw for « Zéro » adjustement

Orange Measure Ring

Double scale in cm / inch

SAGSHOK

More explanations … • In five minutes, with the SAGSHOK, measuring SAG becomes easy and fast. • With its double scale the SAGSHOK indicates the SAG value in cm or inch. • This tool is unavailable anywhere else !! • The SAGSHOK is indispensable to adjust, maintain or optimize your LEFTY for all practices or feeling. • Perfectly compatible for all LEFTY 100/120/130/140mm

STEP 1

SAGSHOK

Demonstration • Take off the stem cap

STEP 2

SAGSHOK

Demonstration • Clean the inner steerer tube

• Clean the lower steerer tube surface

STEP 3

SAGSHOK

Demonstration • Insert slowly the SAGSHOK into the steerer tube (Without the Orange Measure Ring)

STEP 4

SAGSHOK

Demonstration • Put now onto the SAGSHOK the Orange Measure Ring • Push it in contact with the lower steerer tube surface

STEP 5

SAGSHOK

Demonstration • Adjust the Red Screw to obtain any simple value on the scale (Whole number like 2, 5, 9…)

• Read the value at the bottom of the Orange Measuring Ring • Write down this value, called: – No load

STEP 6

SAGSHOK

Demonstration • Sit on the bike – – –

Rider + equipement Hands on handlebar Feet on pedals

(A wall could be helpful !)

STEP 7

SAGSHOK

Demonstration • Get off the bike • Read the value • Write down this second value, called : – Load

STEP 8

SAGSHOK

Demonstration • SAG = No load – Load No load Load

STEP 9

SAGSHOK

Demonstration • Adjust the SAG according to your practice and to your LEFTY fork model (refer to your fork manual) : – Air pressure (dlr, dlr2, ELO, Speed…) Or

– Adjust spring preload (Max, Jake…) – Measure the Load value – Do this process : STEP 5/6/7/8 • SAG adjustement (air pressure or spring preload) • Load value measure, until you obtain the desired SAG

That’s all folks….

SAGSHOK

Contact & prices • Contact : [email protected] • Price for France : – 25 euros

• Price for other countries : – 20 euros + shipping cost (contact me for more details)