RSX-1055 sophistication of some manufacturer’s separate components? Rotel’s RSX-1055 is the perfect solution with 5.1, 6.1 and 7.1 format capability. This model handles all the latest formats including Dolby Pro Logic II, Dolby EX, Rotel XS, dts ES and dts Neo 6. It features the same meticulous attention to our “Balanced Design” engineering philosophy as all of our other products. That means a big EI core transformer, with select grade filter capacitors that deliver sufficient voltage and current to all channels at its rated output. Rotel has long been noted for its conservative power ratings, as stated by Wayne Garcia, from The Perfect Vision in his Nov./Dec. 2001 review of the RSX-1055’s predecessor RSX972. “Rotel’s rating is not only honest; it’s conservative. Remember what I said about gimmicks? When it comes to amplifiers the numbers game is the oldest one in the book”. Each of the five internal power amplifiers delivers 75 watts per channel RMS into 8 ohms, all channels driven, and up to 135 watts per channel under dynamic conditions. For 6.1 and 7.1 channel operation, simply add another Rotel stereo power amplifier. Other features add convenience such as component video switching, an independent Zone 2 output, five assignable digital inputs, discrete on/off codes, rear IR ports, 12 volt trigger, RS-232 interface and full function, learning remote control. When you consider that the RSX-1055 is also “future proof” with upgradable software, it’s a sophisticated surround sound receiver that can’t be beat.

SURROUND SOUND RECEIVER

Looking for the convenience of a surround receiver, but with the performance and

New - Full 7.1 Operation Dolby Digital EX delivers full 7.1 performance. Simply add a stereo amplifier to the extra back channel outputs and enjoy greater depth and realism from your movies.

19

PREAMPLIFIERS

Model THD(20-20kHz) IM Distortion Input Sens. / Impedance Phono (MC) Phono (MM) Line level inputs Phono Overload (MC/MM) Output Sens. / Impedance Frequency Response Phono input Line Level Input Tone Control Bass Treble S/N Ratio (IHF A) Phono (MC) Phono (MM) Line Level Input Power Consumption Dimensions (W x H x D) Front Panel Height Weight (net)

RQ-970 BX — —

RC-1070 0.006% 0.006% @ 1v out

RC-1090 0.004% 0.004% @ 1v out

210 µV / 100 ohms 2.5 mV / 47 K ohms — 16 mV / 160 m 150 mV / 100 ohms

— 1.2 mV /68 K ohms 150 mV / 18 K ohms 16 mV / 160 mV 1V / 100 ohms

250 mV / 100 ohms 2.5 mV / 47 K ohms 150 mV / 18 K ohms 16 mV / 160 mV 1V / 100 ohms

20-20k Hz (±0.2dB) —

20-20k Hz (±0.5dB) 4-100k Hz (+0, -3dB)

20-20k Hz (±0.2dB) 4-100k Hz (±0.5dB)

— —

— —

75 dB 95 dB 13 watts 430 x 92 x 344mm 17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈" 80 mm, 3.1" 5.4 kg / 11.9 lbs

70 dB 75 dB 100 dB 13 watts 430 x 125 x 345mm 17¹⁄₈ x 5 x 13¹⁄₈" 109 mm, 4.3" 7.8 kg / 17.2 lbs

— — 70 dB 75 dB — 10 watts 440 x 72 x 181mm 17³⁄₈ x 2³⁄₄ x 7¹⁄₈" 60 mm, 2.4" 3.1 kg / 6.8 lbs

Models Audio Watts/Channel all channels driven, 8 ohm load, 20 to 20KHz, 0.03% THD, max. THD, (20-20kHz) IM Distortion Input Sens. / Impedance phono line level Output Level Frequency Response Damping Factor Tone Control Bass Treble S/N Ratio (IHF A) FM S/N Ratio (@65dBf) FM Usable Sens. (75 ) FM 50 db Quieting (75 ) mono stereo FM Harmonic Distortion (65dBF/1kHz) FM Capture Ratio Alt Chan. Selectivity Spurious Response Ratio IF Response Ratio Stereo Separation (100Hz/1kHz/10kHz) AM Sensitivity AM Selectivity Power Consumption Dimensions (W x H x D)

Model Power Configurations Watts/Channel all channels driven, unbridged, 8 ohm load, 20 to 20k Hz, 0.06% THD THD (20-20,000Hz) cont. rated power one-half rated power one watt per channel IM Distortion (at rated ower,60Hz:7kHz = 4:1 ) Damping Factor (8 ohms) Input Sens. / Impedance Frequency Response S/N Ratio (IHF A) Power Consumption Dimensions (W x H x D) Front Panel Height Weight (net)

— —

— — — 10-15k Hz (±3dB) —

— — — 10-15k Hz (±3dB) —

— — — 10-15k Hz (±3dB) —

— — — 75dB (mono), 72dB (stereo) 12.2 dBf

— — — 73 dBf (mono), 70 dBf (stereo) 14.2 dBf

— — — 73 dBf (mono), 70 dBf (stereo) 14.2 dBf

20.2 dBf 45.3 dBf 0.2% (mono) 0.3% (stereo) 2.0 dB 47 dB 90 dB — 40 dB/45 dB/35 dB

20.2 dBf 45.3 dBf 0.2% (mono) 0.3% (stereo) 2.0 dB 47 dB (±400 kHz) 90 dB — 40 dB/45 dB/35 dB

20.2 dBf 45.3 dBf 0.2% (mono) 0.3% (stereo) 2.0 dB 47 dB (±400 kHz) 90 dB — 40 dB/45 dB/35 dB

300 µV/m 25 dB 10 Watts 433 x 92 x 334 mm 17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈" 80 mm, 3.1" 4.7 kg / 10.4 lbs

500 µV/m 25 dB 10 watts 440 x 72 x 275 mm 17³⁄₈ x 2⁷⁄₈ x 10⁷⁄₈” 60 mm, 2.4" 3.7 Kg/8.2 lb.

500 µV/m 25 dB 10 watts 435 x 72 x 319 mm 17¹⁄₈ x 2⁷⁄₈ x 12¹⁄₂” 60 mm, 2.4" 3.7 Kg/8.2 lb.

RB-1050 2 x 70 watts

0.03%, maximum — — 0.03%, maximum

0.03%, maximum 0.03%, maximum 0.05%, maximum 0.03%, maximum

0.03%, maximum 0.03%, maximum 0.05%, maximum 0.02%, maximum

0.03%, maximum 0.03%, maximum 0.05%, maximum 0.02%, maximum

0.03%, maximum 0.01%, maximum 0.02%, maximum 0.03%, maximum

0.03%, maximum 0.01%, maximum 0.02%, maximum 0.02%, maximum

0.03%, maximum 0.03%, maximum 0.03%, maximum 0.03%, maximum

0.03%, maximum 0.03%, maximum 0.03%, maximum 0.03%, maximum

400 1.5V / 33 kohms 15-100 kHz (±1dB) 116dB 800 watts 433 x 237 x 380mm 17¹⁄₈ x 9³⁄₈ x 15” 221 mm, 8.7" 34kg / 75 lbs.

180 1.0V / 27 kohms 10-80 kHz (±0.05dB) 115dB 800 watts 433 x 189 x 380mm 17¹⁄₈ x 7¹⁄₂ x 15" 176 mm, 6.9" 17kg / 37.4 lbs.

150 1.0V / 22 kohms 15-100 kHz (±1dB) 116dB 700 watts 433 x 121 x 428mm 17¹⁄₈ x 4³⁄₄ x 16⁷⁄₈" 109 mm, 4.3" 11.8kg / 26 lbs.

150 1.0V / 22 kohms 15-100 kHz (±1dB) 116dB 700 watts 433 x 121 x 428mm 17¹⁄₈ x 4³⁄₄ x 16⁷⁄₈" 109 mm, 4.3" 12.2 kg / 27 lbs

1000 1.0V / 33 kohms 10-100 kHz (±1dB) 125dB 800 watts 433 x 237 x 380mm 17¹⁄₈ x 9³⁄₈ x 15” 221 mm, 8.7" 37.9kg / 83.6 lbs.

1000 1.0V / 33 kohms 10-100 kHz (±1dB) 120dB 550 watts 433 x 140 x 380mm 17¹⁄₈ x 5¹⁄₂ x 15" 127 mm, 5.0" 16.7kg / 36.8 lbs.

500 1.0V / 33 kohms 10-100kHz (±1dB) 120dB 400 watts 433 x 121 x 334mm 17¹⁄₈ x 4³⁄₄ x 13¹⁄₈" 109 mm, 4.3" 10.2kg / 22.4 lbs.

500 1.0V / 33 kohms 10-100kHz (±1dB) 116dB 250 watts 433 x 92 x 334mm 17¹⁄₈ x 3⁵⁄₈ x 13¹⁄₈" 80 mm, 3.1" 8.1kg / 17.86 lbs.

Phase Linearity Signal / Noise Ratio Dynamic Range Channel Separation (1kHz) THD + Noise (at 1kHz) IM Distortion Max Audio Line Output Digital Output Level (coax) Digital Output Impedance Power Consumption Dimensions (W x H x D)

65 dB 108dB -21 to - 15 dBm (peak) 75 ohms 20 Watts 433 x 121 x 334 mm 17¹⁄₈” x 4³⁄₄” x 13¹⁄₈” 109 mm, 4.3" 5.1 kg (11.2 lbs)

±0.5° 96dB 93dB 90dB 0.008% 0.02% 2VRMS 0.5Vpp 75 ohms 15 Watts 440 x 124 x 387mm 17³⁄₈ x 4⁷⁄₈ x 15¹⁄₄”

±0.5° >100dB >96dB >98dB 0.0045% 0.0045% 0.5Vpp 75 ohms 20 Watts 432 x 93 x 337 m 17 x 3¹¹⁄₁₆ x 13¹⁄₄” 80 mm, 3.1" 5.8 kg / 12.8 lb.

±0.5° 100dB 96dB >98dB 0.0045% 0.0045% 2VRMS 0.5Vpp 75 ohms 20 Watts 440 x 72 x 304 mm 17³⁄₈ x 2⁷⁄₈ x 12⁷⁄₁₆” 60 mm. 2³⁄₈" 5.4 kg / 11.9 lbs.

5.7 kg / 12.6 lbs.

RECEIVERS SURROUND PROCESSORS

— —

RB-1070 2 x 130 watts 130 watts 1 x 360 (bridged mono)

RCD-02 1 20-20k Hz (±0.5dB) ±0.05dB

Front Panel Height

— —

RB-1080 2 x 200 watts 200 watts

RCD-1070 1 20-20k Hz (±0.05dB) -

Weight Dimensions (W x H x D)

—

RB-1090 2 x 380 watts 380 watts

RCC-1055 5 20 - 18k Hz (±0.8dB) ±1dB

Input Sensitivity/Impedance Tone Controls (Bass/Treble) Preamp Output Level Video Freq. Response S/N Ratio Input Impedance Output Level General Power Consumption: Power Requirements (AC)

—

RMB-1048 8 x 40 watts 40 watts

RDV-1080 2 Hz to 88 kHz -

S/N Ratio (1HF A-weighted)

—

RMB-1066 6 x 60 watts 60 watts

Model Number Disc Capacity Frequency Response Amplitude Linearity

Model Audio THD IM Distortion (60 Hz:7 kHz) Freq. Response

RT-02

RMB-1075 5 x 120 watts 120 watts

DVD, COMPACT DISC PLAYERS & CHANGERS

Front Panel Height Weight

RT-961

RMB-1095 5 x 200 watts 200 watts

RSP-1066