2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
54 61 003 REMOVING AND INSTALLING/REPLACING ROLLOVER BAR REMOVAL 1. 2. 3. 4.
Tilt seat backrest forwards. Remove rear seat belt from rollover bar. Release screws. SeeFig. 1. Remove rollover bar towards top. See Fig. 2.
INSTALLATION 1. Position rollover bar in chassis. 2. Replace Torx screws (use Loctite). 3. Tighten mounting screws to 18 N.m.
Microsoft Tuesday, February 16, 2010 12:14:01 12:13:57 PM
Page 1
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 1: Identifying Mounting Screws Courtesy of BMW OF NORTH AMERICA, INC.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 2
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 2: Removing Rollover Bar Towards Top Courtesy of BMW OF NORTH AMERICA, INC. REPLACEMENT ONLY Remove all panels and trim .
54 61 011 REMOVING AND INSTALLING/REPLACING BOTH TRIMS ON ROLLOVER BAR ON LEFT OR RIGHT REMOVAL & INSTALLATION 1. Remove panels for rollover protection. Unclip front trim (1) from rear trim (2) and remove. See Fig. 3. 2. Ensure trim retaining lugs are not damaged or panel is scratched. Replace trim if necessary.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 3: Un-clipping Front Trim From Rear Trim Courtesy of BMW OF NORTH AMERICA, INC.
54 61 021 REMOVING AND INSTALLING/REPLACING BOTH PANELS FOR ROLLOVER PROTECTION AT FRONT LEFT OR RIGHT REMOVAL & INSTALLATION 1. Remove rear side trim panel and head restraint. See Fig. 4. 2. Removal of the panels on the left side is depicted; proceed in the same way for the right side. Unclip panel (1) with plastic wedge. See Fig. 4. Feed anchor fitting (2) out of panel. Remove panel. 3. Ensure retaining lugs are not damaged or panel is scratched. Replace panel if necessary. 4. Install release screw (1). See Fig. 5. Tighten screw to 18 N.m.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 4: Un-clipping Panel With Plastic Wedge Courtesy of BMW OF NORTH AMERICA, INC.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 5: Identifying Releasing Screw Courtesy of BMW OF NORTH AMERICA, INC.
54 61 026 REMOVING AND INSTALLING/REPLACING BOTH PANELS FOR ROLLOVER PROTECTION AT REAR LEFT OR RIGHT REMOVAL & INSTALLATION 1. 2. 3. 4.
Remove panels for rollover protection at front. Remove stowage shelf. Remove screws (1). See Fig. 6. Remove panel towards rear. Ensure retaining lugs are not damaged or panel is scratched. Replace panel if necessary.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
2006 MINI Cooper ACCESSORIES & EQUIPMENT Rollover Bar - Cooper
Fig. 6: Identifying Releasing Screws Courtesy of BMW OF NORTH AMERICA, INC.
Microsoft Tuesday, February 16, 2010 12:13:57 PM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
