Remplacement du ressort de chargement Nerf Vortex

au-delà de la réparation. Rédigé par: Cara Pew. Remplacement du ressort de chargement Nerf Vortex Vigilon. © iFixit — CC BY-NC-SA. Www.ifixit.com.
2MB taille 0 téléchargements 263 vues
Nerf Vortex Vigilon Loading Spring Replacement

Nerf Vortex Vigilon Loading Spring Replacement This guide will show you how to replace a loading spring that has broken or rusted beyond repair.

Rédigé par: Cara Pew

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 6

Nerf Vortex Vigilon Loading Spring Replacement

INTRODUCTION You will only need a screwdriver to take apart this Nerf gun and access the loading spring. Also obtain a new spring if needed.

OUTILS: Phillips #00 Screwdriver (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 6

Nerf Vortex Vigilon Loading Spring Replacement

Étape 1 — Removing the slide screws

 The two slide pieces hold the orange sight in place. Expect that the sight will come off when you remove the slide pieces. 

Using a screwdriver, carefully unscrew the three #00 1 cm Phillips screws holding the two slide pieces together.

 Both sides of the slide will come off when the screws are removed.

Étape 2 — Removing the slide pieces 

© iFixit — CC BY-NC-SA

fr.iFixit.com

Lift both slide pieces off of the gun.

Page 3 de 6

Nerf Vortex Vigilon Loading Spring Replacement

Étape 3 — Removing the outer screws



Remove the twelve #00 1 cm Phillips screws.

 Because the holes for the screws are deeper than the screw size, some of the screws may not come out even after you have completely unscrewed them. They will come out when you take off the outside cover in the next step, which is okay. 

Rotate the gun so that the front is facing you to remove the final screw.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 6

Nerf Vortex Vigilon Loading Spring Replacement

Étape 4 — Removing the outside cover

 When removing the cover, the clip attachment and the spring will likely fall out of the gun. 

Lift the outside cover off of the gun. Only the side where you removed the screws will come off.

 The magazine will slide down automatically as you remove the cover.

Étape 5 — Removing the spring



Lift the spring out towards you.

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2018-05-10 08:24:39 PM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 5 de 6

Nerf Vortex Vigilon Loading Spring Replacement

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 6 de 6