Regulatory Statements Industry Canada This device ... - FCC ID
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts ...
Regulatory Statements Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Consult the dealer or an experienced radio/TV technician for help. CAN ICES-3 (B)/NMB-3(B)
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
This device complies with Industry Canada licence-exempt RSS standard(s). Operation ... (e.i.r.p.) is not more than that necessary for successful communication.
Changes or modifications not expressly approved by the party responsible for compliance could void the ... user's manual in accordance FCC & IC requirements.
Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator a
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or ... For telecommunication type connectors and terminals not used for connectio
5350 MHz and 5475-5875 MHz) to comply with the EIRP limit and because high power radars are allocated as primary users ... MHz, these radars could cause interference and/or damage to license exempt LAN devices . No. Antenna. Type ... et parce que les
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and. (2) This device must accept any interference received, including interference that may
undesired operation of the device."2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to ...
Smart LF Oscillator Model TMLF12-4. FCC ID: NI4TMLF12-4. For vehicles sold in U.S.A.: NOTE. This device complies with part 15 of the FCC Rules. Operation is ...
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For vehicles ...
nyilatkozat másolatát a következÅ cÃmen találhatja meg: plantronics. com/conformity. it Plantronics B.V. dichiara che il prodotto descritto nella presente documentazione è conforme ai requisiti essenziali e ad altre disposizioni in materia sta
the rules and regulations in the locations into which they are sold and will be .... The use of. 802.11b and 802.11g wireless technology in certain countries.
You can find additional Safety Best Practices and information on REACH ... For some portable computers, the radio regulatory labels may be found either in the battery ..... Kontakt des Notebooks oder Adapters mit Hautflächen. Während des ...
Firstech, LLC. | 2. QUICK START CARD. 1 WAY 4 BUTTON REMOTES. If you have an alarm and optional LED(s) installed, it will flash once a second if armed.
Label is located in the battery compartment. To access to the label, please follow the instructions included in this manual to replace the battery. 2 Owner Manual.
FCC/IC Notices. This device complies with Part 15 of FCC. Rules and RSSÐGen of IC Rules. Operation is suEMect to the following two conditions: (1) this device may notcauseäinterference, and. (2) this device must accept any interference, including
Operation is subject to the fol lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference ...
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and. (2) this device must accept any inte
This device complies with Part 15 of the FCC Rules. ... Caution: Any changes or modifications not expressly approved by the party responsible for compliance.
NOTE:The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could ...