PISTOLETS MANUELS HIGH TEC www.anest-iwata.fr
Pistolet Manuel W 200
CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C. W 200 pressure spray gun in accordance with ASTM Designation: D5286-95 Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I - 1997 Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved were: PRIMER SOLID COLOUR BASECOAT CLEAR LACQUER
93.2% 85.9% 82.3% 73.5%
Signed for MIRRC THATCHAM:
M. Smith Chief Executive
.....................................................
The Motor Insurance Repair Research Centre Thatcham Training Centre Thatcham Berkshire RG19 4ZD U.K.
Pression Succion
SPECIFICATIONS TECHNIQUES Modèle mm
bar
High T.E.C. W200 Alimentation à Pression * W200-08L AE 0.8 2.0 W200-10L AE 1.0 2.0 W200-124P AE 1.2 2.0 W200-082 AE 0.8 3.0 W200-102 AE 1.0 3.0 W200-122P AE 1.2 3.0 High T.E.C. W200 Alimentation à Succion W200-142S AE 1.4 3.0 W200-152S AE 1.5 3.0 W200-154P AE 1.5 2.0 W200-182S AE 1.8 3.0 W200-202S AE 2.0 3.0
Consommation d’air l/min
Chapeau ml/min
270 270 270 560 560 560
255 255 255 500 500 500
280 280 280 400 400 400
LV2 LV2 LV2 G2P G2P G2P
330 330 270 330 360
120 240 200 290 350
280 290 260 340 290
K2 K2 LV2 K2 R2
* Autres diamètres disponibles en Pression : 1.4, 1.6, 1.8 Pression Maxi. d’utilisation: 6.8 bar Température d’utilisation: 5~40C°
gr
mm
Niveau sonore: (LAeqT)
ANEST IWATA France 38074 St Quentin Fallavie Cedex B.P. 7405 Tel. 04 74 94 59 69 Fax 04 74 94 34 39 e-mail:
[email protected] www.anest-iwata.fr
81.2 dB (A)
Distribué par:
460 K2