OontZ Angle 3 Back Case Replacement

speaker work for at least 7 hours with one full charge. OUTILS: Phillips #0 Screwdriver (1). iFixit Opening Tools (1). OontZ Angle 3 Back Case Replacement.
NAN taille 0 téléchargements 44 vues
OontZ Angle 3 Back Case Replacement

OontZ Angle 3 Back Case Replacement This guide shows how to replace the back case of OontZ Angle 3, and serves as a prerequisite for the other guides.

Rédigé par: Mason Hollander

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 4

OontZ Angle 3 Back Case Replacement

INTRODUCTION Oontz Angle 3 is a wireless Bluetooth speaker manufactured by Cambridge SoundWorks. It's main features are compact size, along with rubber casing, which makes it dustproof, sandproof and splashproof. Its normal output power is 10 Watts. The battery capacity is 2200 mAh, which helps this speaker work for at least 7 hours with one full charge.

OUTILS: Phillips #0 Screwdriver (1) iFixit Opening Tools (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 4

OontZ Angle 3 Back Case Replacement

Étape 1 — Back Case

 Make sure that the OontZ Angle 3 is powered off before starting the disassembly. 

Use the plastic opening tool to remove the rubber caps from each end of the speaker.

Étape 2 

© iFixit — CC BY-NC-SA

fr.iFixit.com

Remove four (4) 11.7 mm Phillips #0 screws from each side at the bottom of the speaker.

Page 3 de 4

OontZ Angle 3 Back Case Replacement

Étape 3



Use the plastic opening tool on one of the corners to separate the bottom piece from the speaker, and then remove the piece.

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-09-07 05:14:59 AM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 4