NanoTeK EMM is based on chemical nano technology. NanoTeK EMM has been proven to effectively protect metal, mechanical, electrical and electronic parts, devices, machines and equipment from all forms of water (vapor, humidity, condensation water, saltwater, etc.). Nano-technology covers the surface of the material with a Tri - Layer of self-organizing molecules which are smaller than the wave length of visible light. The optical appearance of the surface is not affected by the ultra thin layer of the NanoTeK Clear Laque.

NanoTeK Protection E.M.M.

Properties                

It protects mechanical, electrical and electronic components, assemblies, devices, machines and installations against all forms of moisture, without impeding their electrical conductivity. It ensures electrical conductivity, even under water, thus eliminating the usual short-circuiting. The same applies for the functionality of electronic parts and appliances or systems. It protects all kinds of metal from corrosion. It has been proven to effectively protect metal, mechanical, electrical and electronic parts, devices, machines and equipment from all forms of water ( vapor, humidity, condensation water, splashes, fog, rain/acid rain, chlorinated water, flooding, burst water pipes, water used for fire fighting, saltwater, etc.) It can restore the operation of electrical devices, installations and machines that are already wet and/or flooded, thus reducing failures and downtimes. It can be used for prevention, repairs and emergencies. It extends the life of electrical and electronic devices in damp environments (for example, in areas with high humidity). It effectively inhibits/prevents corrosion and damages. It removes dust and dirt. Through this cleaning effect, current leaks resulting in ignition failures can be prevented. As a result of its excellent lubrication properties, it is also very effective at eliminating squeaking and mechanical friction. It has no adverse effect on standard plastics, rubber, glass, varnishes (also insulating varnishes), ceramics, metal (general and galvanized), steel, stainless steel, iron, aluminum (general, raw or grinded), copper, zinc, tin, brass, tin-solder, textiles and electric coils. It contains no resins, silicone, acrylic, Teflon or aromatic compounds. It is not affected by surfactants, but can be easily removed with circuit board cleaners, brake cleaners or alcohol. It is not water soluble and does not emulsify. It is insensitive to extreme weather and temperatures. It remains absolutely effective at temperatures between –20 and +130°C. Thanks to its oily consistency, it always maintains its elasticity, making it the ideal water repellent for flexible parts.

Application and technical Info Consumption 10 ml/m² depending on consistency of the surface material and application method. Cleaning The surface must be clean and dry, free of grease and tensides (soap or cleaner residues). Application Spray the coating on from a distance of about 15 cm and from different angles until the surface is moist. Flooding application is possible as well. After application wait for 5-10minutes for effect to take place. Product is suited for the following surfaces NanoTeK EMM has been proven to effectively protect metal, mechanical, electrical and electronic parts, devices, machines and equipment from all forms of water Storage At room temperature at least 6 months within unopened original container. Protect from moisture, direct sunlight, heat and frost. Application temperature Ideally room temperature, must be above +5 degrees Celsius Article NR.: EMM-001 NanoTeK EMM