XG-MB70X A
SERVICE MANUAL SX5Q3XGMB70XA
MULTIMEDIA-PROJECTOR
MODEL
XG-MB70X A
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
OUTLINE This Service Manual covers only different points from Model XG-MB70X. For other technical points, refer to the XG-MB70X Service Manual.
CONTENTS Page » » » » » » » » » » »
SPECIFICATIONS .........................................................................................................................................2 A COMPARISON TABLE WITH THE UNIT OF XG-MB70X A ...................................................................... 3 IMPORTANT SERVICE SAFETY NOTES (FOR USA) ................................................................................ 4 NOTE TO SERVICE PERSONNEL ..............................................................................................................5 BALLAST UNIT OUTPUT POWER (LAMP OUTPUT) ADJUSTMENT ....................................................... 9 TROUBLESHOOTING TABLE ...................................................................................................................10 DESCRIPTION OF SCHEMATIC DIAGRAM .............................................................................................13 SCHEMATIC DIAGRAM .............................................................................................................................14 PRINTED WIRING BOARD ASSEMBLIES................................................................................................20 PARTS LIST ...............................................................................................................................................24 PACKING OF THE SET .............................................................................................................................34
SHARP CORPORATION
This document has been published to be used for after sales service only. The contents are subject to change without notice.
XG-MB70X A
SPECIFICATIONS Product type Model Video system
Multimedia Projector XG-MB70X NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/ DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: 0.7" No. of dots: 786,432 dots (1,024 [H] ✕ 768 [V]) Lens 1.5 ✕ electric zoom / focus lens, F2.0–2.5, f = 21.3–31.6 mm Projection lamp 275 W DC lamp Component input (INPUT 1/2)/ 15-pin mini D-sub connector output (OUTPUT) signal Y: 1.0 Vp-p, sync negative, 75 Ω terminated PB: 0.7 Vp-p, 75 Ω terminated PR: 0.7 Vp-p, 75 Ω terminated Horizontal resolution 750 TV lines (DTV720P) Computer RGB input (INPUT 1/2)/ 15-pin mini D-sub connector output (OUTPUT) signal RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) VERTICAL SYNC. SIGNAL: Same as above Video input signal RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated (INPUT 3) S-video input signal 4-pin mini DIN connector (INPUT 4) Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated Audio input signal ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo) USB terminal 4-pin B-type USB female connector RS-232C terminal 9-pin mini DIN connector LAN terminal 8-pin RJ-45 modular connector Pixel clock 12–108 MHz Vertical frequency 43–85 Hz Horizontal frequency 15–70 kHz Audio output 2.0 W (monaural) Speaker system 4.0 cm ✕ 2.85 cm oval ✕1 Rated voltage AC 100–240 V Input current 3.9 A Rated frequency 50/60 Hz Power consumption 370 W (Standard mode)/320 W (Eco mode) with AC 100 V 350 W (Standard mode)/300 W (Eco mode) with AC 240 V Power consumption (standby) 6 W (AC 100 V) – 8 W (AC 240 V) Heat dissipation 1,390 BTU/hour (Standard mode)/1,200 BTU/hour (Eco mode) with AC 100 V 1,315 BTU/hour (Standard mode)/1,130 BTU/hour (Eco mode) with AC 240 V Operating temperature 41°F to 104°F (+5°C to +40°C) Storage temperature –4°F to 140°F (–20°C to +60°C) Cabinet Plastic I/R carrier frequency 38 kHz Dimensions (approx.) 12 7/32" ✕ 3 33/64" ✕ 11 7/64" (310 (W) ✕ 89 (H) ✕ 282 (D) mm) (main body only) 12 7/32" ✕ 4 7/64" ✕ 11 5/16" (310 (W) ✕ 104 (H) ✕ 287 (D) mm) (including adjustment foot and projecting parts) Weight (approx.) 9.1 lbs. (4.1 kg) Replacement parts Lamp unit (Lamp/cage module) (AN-MB70LP), Remote control (RRMCGA313WJSA), Power cord for U.S., Canada, etc. (QACCDA007WJPZ), Power cord for Europe, except U.K. (QACCVA011WJPZ), Power cord for U.K., Hong Kong and Singapore (QACCBA036WJPZ), Power cord for Australia, New Zealand and Oceania (QACCLA018WJPZ), RGB cable (QCNWGA045WJPZ), USB cable (QCNWGA014WJPZ), Storage case (GCASNA014WJSA), Lens cap (RCAPHA021WJSA), Projector manual and technical reference CD-ROM (UDSKAA072WJZZ), “QUICK GUIDE” label (TLABZA717WJZZ), Operation manual (TiNS-C177WJZZ)
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
2
XG-MB70X A
A COMPARISON TABLE WITH THE UNIT OF XG-MB70X A XG-MB70X Ref. No.
Parts No. DUNTKC612WEF0
XG-MB70X A Change
★
→
J
DUNTKC613WEF0
Parts No. DUNTKC612WEF5 ←
J
Description
Code
MAIN Unit
CU
FORMATTER Unit
CK
DUNTKC615WEF0
→
J
DUNTKC615WEF5
FRONT R/C Unit
AN
DUNTKC681WEF0
→
J
DUNTKC681WEF5
REAR R/C Unit
AN
RDENCA082WJZZ
→
J
DUNTKD556WEF1
POWER SUPPLY Unit
BR
→
J
DSETUD496FMF2
BALLAST POWER Unit
–
DUNTKD496WEF2
BALLAST Unit
or RDENCA118WJZZ RDENCA088WJZZ
–
When you exchange a ballast unit (DUNTKD496WEF2), please order a ballast power supply unit (DSETUD496FMF2).
J
DUNTKD497FMF2
BALLAST Control Unit
RUNTKA090WJZZ
J
←
CMOS CAMERA Unit
BS
RUNTKA091WJZZ
J
←
PHOTO SENSOR Unit
AZ
3
XG-MB70X A
IMPORTANT SERVICE SAFETY NOTES (for USA) Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm per volt., or higher, sensitivity to measure the AC voltage drop across the resistor (See Diagram). » All checks must be repeated with the AC plug connection reversed. (If necessary, a non-polarized adapter plug must be used only for the purpose of completing these checks.) Any reading of 0.3 volts RMS (this corresponds to 0.2 milliamp. AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the unit to the owner.
WARNING 1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing. CAUTION: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE REPLACE ONLY WITH SAME TYPE F701 (6.3A, AC250V)
BEFORE RETURNING THE PROJECTOR: (Fire & Shock Hazard)
Before returning the projector to the user, perform the following safety checks: 1. Inspect lead wires are not pinched between the chassis DVM and other metal parts of the projector. AC SCALE 2. Inspect all protective devices such as non-metallic 1.5k ohm control knobs, insulating materials, cabinet backs, 10W adjustment and compartment covers or shields, isolation resistor-capacity networks, mechanical insulators, etc. 3. To be sure that no shock hazard exists, check for 0.15 µF TEST PROBE current leakage in the following manner: » Plug the AC cord directly into a 120-volt AC outlet, (Do not use an isolation transformer for this test). » Using two clip leads, connect a 1.5k ohm, 10 watt TO EXPOSED CONNECT TO resistor paralleled by a 0.15µF capacitor in parallel METAL PARTS KNOWN EARTH GROUND between all exposed metal cabinet parts and earth ground. 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
SAFETY NOTICE
AVIS POUR LA SECURITE
Many electrical and mechanical parts in DMD™ Projector have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by “å” and shaded areas in the Replacement Parts Lists and Schematic Diagrams. For continued protection, replacement parts must be identical to those used in the original circuit. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards.
De nombreuses pièces, électriques et mécaniques, dans les projecteur à DMD™ présentent des caractéristiques spéciales relatives à la sécurité, qui ne sont souvent pas évidentes à vue. Le degré de protection ne peut pas être nécessairement augmentée en utilisant des pièces de remplacement étalonnées pour haute tension, puissance, etc. Les pièces de remplacement qui présentent ces caractéristiques sont identifiées dans ce manuel; les pièces électriques qui présentent ces particularités sont identifiées par la marque “å” et hachurées dans la liste des pièces de remplacement et les diagrammes schématiques. Pour assurer la protection, ces pièces doivent être identiques à celles utilisées dans le circuit d’origine. L’utilisation de pièces qui n’ont pas les mêmes caractéristiques que les pièces recommandées par l’usine, indiquées dans ce manuel, peut provoquer des électrocutions, incendies ou autres accidents.
WARNING: The bimetallic component has the primary conductive side exposed. Be very careful in handling this component when the power is on.
AVERTISSEMENT: La composante bimétallique dispose du conducteur primaire dénudé. Faire attention lors de la manipulation de cette composante sous tension.
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
4
XG-MB70X A
NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
123456789012345678901234567890121234567890123456
UV-RADIATION PRECAUTION 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
PRECAUTION POUR LES RADIATIONS UV 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
The light source, UHP lamp, in the LCD projector emits small amounts of UV-Radiation.
La source de lumière, la lampe UHP, dans le projecteur LCD émet de petites quantités de radiation UV.
AVOID DIRECT EYE AND SKIN EXPOSURE.
EVITEZ TOUTE EXPOSITION DIRECTE DES YEUX ET DE LA PEAU.
To ensure safety please adhere to the following:
Pour votre sécurité, nous vous prions de respecter les points suivants: 1. Toujours porter des lunettes de soleil lors d’un entretien du projecteur avec la lampe allumée et le haut du coffret retiré.
1. Be sure to wear sun-glasses when servicing the projector with the lamp turned “on” and the top enclosure removed.
2. Ne pas faire fonctionner la lampe à l’extérieur du boîtier de lampe.
2. Do not operate the lamp outside of the lamp housing.
3. Ne pas faire fonctionner plus de 2 heures avec le coffret retiré.
3. Do not operate for more than 2 hours with the enclosure removed.
Précautions pour les radiations UV et la lampe moyenne pression
UV-Radiation and Medium Pressure Lamp Precautions
1. Toujours débrancher la fiche AC lors du remplacement de la lampe. 2. Laisser l’unité refroidir pendant une heure avant de procéder à l’entretien. 3. Ne remplacer qu’avec une lampe du même type. Type AN-MB70LP, caractéristique 275W. 4. La lampe émet de petites quantités de radiation UVéviter tout contact direct avec les yeux. 5. La lampe moyenne pression implique un risque d’explosion. Toujours suivre les instr uctions d’installation décrites ci-dessous et manipuler la lampe avec soin.
1. Be sure to disconnect the AC plug when replacing the lamp. 2. Allow one hour for the unit to cool down before servicing. 3. Replace only with same type lamp. Type AN-MB70LP rated 275W. 4. The lamp emits small amounts of UV-Radiation, avoid direct-eye contact. 5. The medium pressure lamp involves a risk of explosion. Be sure to follow installation instructions described below and handle the lamp with care.
5
XG-MB70X A 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
UV-RADIATION PRECAUTION (Continued) 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
PRECAUTION POUR LES RADIATIONS UV (Suite) 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456 123456789012345678901234567890121234567890123456
Lamp Replacement
Remplacement de la lampe
Note:
Remarque:
Since the lamp reaches a very high temperature during units operation replacement of the lamp should be done at least one hour after the power has been turned off. (to allow the lamp to cool off.) Installing the new lamp, make sure not to touch the lamp (bulb) replace the lamp by holding its reflector 2. [Use original replacement only.]
Comme la lampe devient très chaude pendant le fonctionnement de l’unité, son remplacement ne doit être effectué au moins une heure après avoir coupé l’alimentation (pour permettre à la lampe de refroidir). En installant la nouvelle lampe, s’assurer de ne pas toucher la lampe (ampoule). Remplacer la lampe en tenant son réflecteur 2. [N’utiliser qu’un remplacement d’origine.]
1 Lampe
1 Lamp
2 Reflecteur
2 Reflector
DANGER ! –– Never turn the power on without the lamp to avoid electric-shock or damage of the devices since the stabilizer generates high voltages at its start.
DANGER ! –– Ne jamais mettre sous tension sans la lampe pour éviter un choc électrique ou des dommages des appareils car le stabilisateur génère de hautes tensions à sa mise en route.
Since small amounts of UV-radiation are emitted from an opening between the exhaust fans, it is recommended to place the cap of the optional lens on the opening during servicing to avoid eye and skin exposure.
Comme de petites quantités de radiation UV sont émises par une ouverture entre les ventilateurs aspirants, il est recommandé de placer le capuchon de l’optique optionnelle sur l’ouverture pendant l’entretien pour éviter une exposition des yeux et la peau.
6
XG-MB70X A
WARNING:
High brightness light source, do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly in to the beam of light.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO MOISTURE OR WET LOCATIONS.
CAUTION
The lighting flash with arrowhead within a triangle is intended to tell the user that parts inside the product are risk of electric shock to persons.
RISK OF ELECTRIC SHOCK. DO NOT REMOVE SCREWS EXCEPT SPECIFIED USER SERVICE SCREW.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE CABINET. NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the manual with the projector.
CAUTION (POWER Unit)
6.3A 250V
For continued protection against a risk of fire, replace only with same type 6.3A, AC250V fuse. (F701)
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212 AVERTISSEMENT: Source lumineuse de grande intensité. Ne pas fixer le faisceau lumineux ou le regarder directement. Veiller particulièrement à éviter que les enfants ne fixent directement le faisceau lumineux. AVERTISSEMENT: AFIN D’EVITER TOUT RISQUE D’INCENDIE OU D’ELECTROCUTION, NE PAS PLACER CET APPAREIL DANS UN ENDROIT HUMIDE OU MOUILLE.
ATTENTION
L’éclair terminé d’une flèche à l’intérieur d’un triangle indique à l’utilisateur que les pi‘eces se trouvant dans l’appareil sont susceptibles de provoquer une décharge électrique.
RISQUE D’ÉLECTROCUTION. NE PASR ETIRER LES VIS Á L’EXCEPTION DE LA VIS DE REPARATION UTILISATEUR SPECIFIEES
Le point d’exclamation à l’intérieur d’un triangle indique à l’utilisateur que les instructions de fonctionnement et d’entretien sont détaillées dans les documents fournis avec le projecteur.
ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION, NE PAS RETIRER LE CAPOT. AUCUNE DES PIECES INTERIEURES N’EST REPARABLE PAR L’UTILISATEUR, A L’EXCEPTION DE L’UNITE DE LAMPE. POUR TOUTE REPARATION, S’ADRESSER A UN TECHNICIEN D’ENTRETIEN QUALIFIE.
PRECAUTION (Unité de PUTSSANCE) Pour une protection continue contre un risques d’incendie, ne remplacer qu’avec un fusible 6.3A,AC250V 6.3A 250V du même type. (F701)
7
XG-MB70X A
Precautions for using lead-free solder 1 Employing lead-free solder "PWBs" of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example:
LFa Indicates lead-free solder of tin, silver and copper. 2 Using lead-free wire solder When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause damage or accident due to cracks. As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40°C, we recommend you to use a dedicated soldering bit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area. 3 Soldering As the melting point of lead-free solder (Sn-Ag-Cu) is about 220°C which is higher than the conventional lead solder by 40°C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper. Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing Part No. ZHNDAi123250E ZHNDAi126500E ZHNDAi12801KE
★ J J J
Description φ0.3mm 250g(1roll) φ0.6mm 500g(1roll) φ1.0mm 1kg(1roll)
8
Code BL BK BM
XG-MB70X A
BALLAST UNIT OUTPUT POWER (LAMP OUTPUT) ADJUSTMENT 1. List of adjustment-related parts When the following parts have been replaced, adjust the ballast unit output power (lamp output). 1 2 3 3' 4 5
Parts Name Cement resistor Control PWB Ballast microprocessor (FLASH) Ballast microprocessor (MASK) 5V regulator PWM controller
Ref. No. R922 --IC7707 IC7707 IC7704 IC7701
Parts Code RR-WZA015WJZZ DUNTKD497FMF2 RH-iXB384WJZZQ RH-iXB390WJZZQ VHiTA78L05F-1Y VHiM51995AF-1Y
2. Adjustment tools The following tools are required in order to adjust the ballast unit output power (lamp power). 1 2
Parts Name Adjustment jig (resistance load 25Ω) Connecting cord (conversion cable)
Parts Code RUNTZA018WJZZ QCNW-E008WJZZ
Maker Asahi Tushin SMK
3. Adjusting the ballast unit output power (lamp power) Take the following procedure to adjust the ballast unit output power (lamp power). [How to set up] Ballast Unit Lamp Cable (QCNW-E190WJQZ)
Tester (Voltage)
+
-
MB70X A Projector TP1
Adjustment Jig (RUNTZA018WJZZ) Connecting Cord (QCNW-E008WJZZ)
TP2
[How to adjust]
1. Disconnect the MB70X A projector's ballast unit lamp cable from the lamp. Connect the cable to the connecting cord (QCNW-E008WJZZ). 2. Connect the connecting cord (QCNW-E008WJZZ) to the adjustment jig (RUNTZA018WJZZ). 3. Hook up the tester's negative probe and positive probe to the TP1 and TP2, respectively, of the adjustment jig (RUNTZA018WJZZ). 4. Turn on the power of the MB70X A projector. 5. Warm up the projector for longer than 60 seconds. 6. Adjust the variable control (R7728) of the ballast control PWB (DUNTKD497FMF2) to achieve the tester reading of 83±0.5 V. Specification: 83±0.5V
4. Precautions 1) Electric shock: Be careful not to touch the adjustment jig's test points TP1 and TP2 during continuity because high voltage and large current are applied at them. 2) Heat hazard: Keep in mind that the adjustment jig's resistance load is hot during continuity. 3) Lamp cable connection: Make sure the lamp cable and the connecting cord (QCNW-E008WJZZ) are tightly connected. If they are poorly connected, smoke or fire may be caused due to an arc discharge.
9
XG-MB70X A
TROUBLESHOOTING TABLE Checking the power unit
There is no voltage output at P704.
NO
Check the MAIN PWB unit.
YES Which output voltage line fails?
Other
Check the T705, IC704 and their peripheral circuits.
NO
Check the P701 or AC cord.
13V, 6 Is AC voltage(90 ~ 264V) applied across the P701 connector? YES Is AC voltage(90 ~ 264V) applied across the P702 or P703 connector?
Is the Bimetal SW open?
YES
Push the red button of the bimetal.
NO Is the fuse F701 open?
YES
Replace the F701.
NO Is the resistor R717 open?
YES
Replace the R717.
NO Is the fuse F705 open? NO Replace Power unit.
10
YES
Replace the F705.
XG-MB70X A
Lamp fails to light-up
Turn on the power switch. Is discharging sound heard from lamp?
YES
Is the lamp out of socket?
YES
Reconnect the lamp into socket.
NO
Check the microproccessor and its peripheral circuits.
NO
NO
Replace the lamp.
Is the cooling fan running?
NO
Check the power supply circuits.
NO
Check the power supply circuits.
YES Is DC 380V pin(4) & 20V pin(1) voltage applied between P901 connector pins? YES Is LOW LEVEL voltage applied between pins(1) and NO (5) of ballast's P7702 connector.
Is the P7702 connector disconnected?
YES Replace the ballast.
YES Reconnect it into socket correctly.
11
XG-MB70X A
-MEMO-
12
XG-MB70X A
DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 220V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
WAVEFORM MEASUREMENT CONDITION: 1. Waveforms at test points are observed at the supply voltage of AC 220V. Signals are fed by a color bar signal generator for servicing purpose.
INDICATION OF RESISTOR & CAPACITOR: RESISTOR 1. The unit of resistance “Ω” is omitted. (K=kΩ=1000 Ω, M=MΩ). 2. All resistors are ± 5%, unless otherwise noted. (J= ± 5%, F= ± 1%, D= ± 0.5%) 3. All resistors are 1/10W, unless otherwise noted. 4. All resistors are Carbon type, unless otherwise noted. W : Cement C : Solid S : Oxide Film T : Special N : Metal Coating CAPACITOR 1. All capacitors are µF, unless otherwise noted. (P=pF=µµF). 2. All capacitors are 50V, unless otherwise noted. 3. All capacitors are Ceramic type, unless otherwise noted. (ML): Mylar (TA): Tantalum (PF): Polypro Film (ST): Styrol
CAUTION: This circuit diagram is original one, therefore there may be a slight difference from yours.
SAFETY NOTES: 1.DISCONNECT THE AC PLUG FROM THE AC OUTLET BEFORE REPLACING PARTS. 2.SEMICONDUCTOR HEAT SINKS SHOULD BE REGARDED AS POTENTIAL SHOCK HAZARDS WHEN THE CHASSIS IS OPERATING.
IMPORTANT SAFETY NOTICE: PARTS MARKED WITH “å” ( ) ARE IMPORTANT FOR MAINTAINING THE SAFETY OF THE SET. BE SURE TO REPLACE THESE PARTS WITH SPECIFIED ONES FOR MAINTAINING THE SAFETY AND PERFORMANCE OF THE SET.
13
XG-MB70X A
XG-MB70X A
SCHEMATIC DIAGRAM H
Ë POWER SUPPLY Unit DUNTKD556WEF1
G
F
E
D
C
B
A
1
2
3
4
5
14
6
7
8
9
10
11
12
13
14
15
16
15
17
18
19
XG-MB70X A
XG-MB70X A
Ë BALLAST Unit H
DUNTKD496WEF2
G
F
E
D
C
B
A
1
2
3
4
5
16
6
7
8
9
10
11
12
13
14
15
16
17
17
18
19
XG-MB70X A
XG-MB70X A
Ë BALLAST CONTROL Unit H
G
F
E
D
C
B
DUNTKD497FMF2
A
1
2
3
4
5
18
6
7
8
9
10
11
12
13
14
15
16
19
17
18
19
XG-MB70X A
PRINTED WIRING BOARD ASSEMBLIES H
G
F
E
D
C
B
A
POWER SUPPLY Unit (Side-A) 1
2
3
4
20
5
6
D
POWER SUPPLY Unit (Side-B)
1
2
3
4
21 R705
R730
D710
5
C701
C723
FB706
D706 R721
R764 R725
D707
R738 Q706
Q705
D708
R749
C739 R740
R742
R748
C729
R743
R737
C722
G
R704
IC702
R735
R752 R750
R756 R753 C736 R751
R754
R760
R759
R758
R757
H
R703
R731
E C717
R736
C724
D705
IC902
R767 R768 C705 R711 C703 R766 R762 R708 R710 R732 C706 C713 C702 R702 R712 C708 D704 D722 R728 R718 R715
R706 R707
C718
C716
XG-MB70X A
R755
IC704 FB704
C719 D713
R733
F
D702
R763 FB705
C
B
A
POWER SUPPLY Unit (Chip Parts Side-B)
6
XG-MB70X A
H
G
BALLAST Unit (Side-A)
F
E
D
BALLAST Unit (Side-B) C R906
R907
R909
R910
C908
C905
C924
C907
R948
R918
R920
R919
R921
R949
C925 C909
R939 R915
R904
R945
R903
R902
R944
R938
R943
A
R940
R950
D912
C906
R914
Q905
Q906
D911
C922
R913
FB902
Q903
R901
R912
C904
R916
C902
C903
D902
C911
D904
R941 R942
R917
R908
FB901
R932
R935
C915
D901
R927
R933
C913 R934
R925
R926 R946
R928 R929 R930 R931 C910
B
R911
R924
R937
BALLAST Unit (Chip Parts Side-B) 1
2
3
4
22
5
6
XG-MB70X A
H
G
BALLAST CONTROL Unit (Side-A)
C7746 R7787 C7739
R7761
D7703
R7720 R7723 C7731 R7755
C7713 R7721 C7719 R7731 C7744
IC7709
R7762
D7712
Q7707
R7726
R7712 C7707
R7725 R7724
C7710 C7715
C7734
C7709 R7717
D7713
R7719 C7712
R7775 R7776 D7711
C7742 C7728 R7793
R7770 R7769
R7783 C7749
C7727
C7718
C7741 C7737
IC7707
R7784 C7750
R7728
C7752
X7701
C7745 D7714
R7772
F
IC7701
C7733 C7736
C7751
P7702
R7704 C7701 R7708
P7701 D7715
C7717
E
BALLAST CONTROL Unit (Chip Parts Side-A)
D
C
BALLAST CONTROL Unit (Side-B)
R7737
IC7705
R7744 R7745 R7740 R7747
R7751 R7757
R7743 R7774
R7760
R7778
Q7709
C7723 R7779 R7741 C7725 R7742 C7726 R7738
R7789 R7790 R7791 R7792
R7777
R7722
R7781
R7780
R7759
C7730
R7767
C7740 R7773 C7743
R7736
C7724
D7706
IC7704
R7795 R7794 R7796 C7722 C7721
Q7708
R7729
Q7706
C7738
Q7703
R7764 R7771 R7763 R7765
R7716
Q7705
R7732 R7727 C7716 R7734 R7766
R7733
Q7704
R7748
R7756 R7786 R7785 R7735
R7752
R7730
Q7711
R7714
R7701
R7788
D7704
C7708
D7702
D7701
R7753
Q7702
C7720
R7739 Q7701
R7713 R7718 C7711
R7711
C7735
D7705
R7706
C7704
R7707
B
R7703
R7705 C7702 R7710 C7706 C7703
R7715
R7709
R7702
C7705
R7749 R7746 R7750 R7758 R7754
A
BALLAST CONTROL Unit (Chip Parts Side-B) 1
2
3
4
23
5
6
XG-MB70X A Ref. No.
Part No.
★
Description
PARTS LIST
Ref. No.
Code
INTEGRATED CIRCUITS
HOW TO ORDER REPLACEMENT PARTS To have your order filled promptly and correctly, please furnish the following informations.
in USA:
3. PART NO.
4. DESCRIPTION
5. CODE
6. QUANTITY
Description
Code
PRINTED WIRING BOARD ASSEMBLIES Unit Code change DUNTKC612WEF5 DUNTKC615WEF5 DUNTKC681WEF5
J MAIN Unit J FRONT R/C Unit J REAR R/C Unit
Unit composition change DUNTKD556WEF1 J POWER SUPPLY Unit DSETUD496FMF2 J BALLAST POWER Unit DUNTKD496WEF2 – BALLAST Unit
Q702 Q704 Q705 Q706
VS2SK3687++-1 VS2SK3687++-1 VS2SA1797Q+-1Y VS2SC3928AR-1Y
J J J J
TA78L12F STR-W6765N HA17431UA-TL FA5501AN-D1
AF AL AE AQ
J J J J
2SK3687 2SK3687 2SA1797Q 2SC3928AR
AS AS AD AB
DIODES
★ MARK: SPARE PARTS-DELIVERY SECTION ★
VHiTA78L12F-1Y VHiSTRW67652E VHiHA17431U-1Y VHiFA5501AN-1Y
å D701 D702 D703 D704 D705 D706 D707 D708 D709 D710 D711 D712 D713 D714 å D715 å D716 D717 D718 D722
in CANADA: Contact SHARP Electronics of Canada Limited Phone (416) 890-2100.
Part No.
IC702 IC703 IC704 IC902
TRANSISTORS
Contact your nearest SHARP Parts Distributor. For location of SHARP Parts Distributor, Please call Toll-Free; 1-800-BE-SHARP
Ref. No.
Code
POWER SUPPLY UNIT
Parts marked with "å" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
2. REF. NO.
Description
DUNTKD556WEF1
PARTS REPLACEMENT
1. MODEL NUMBER
★
Part No.
CU AN AN
VHDD10XB60H-1 VHD1SS355//-1Y RH-DXA073WJZZ VHD1SS355//-1Y VHDLi114+++-1Y VHDRB160M40-1Y VHDRB160M40-1Y VHDD1FL20U/-1Y RH-DX0066GEZZY RH-EX1294CEZZY RH-DX0066GEZZY RH-DX0066GEZZY VHDD1FL20U/-1Y RH-DXA070WJZZY RH-FXA003WJZZ RH-FXA003WJZZ RH-DX0459CEZZ RH-DX0469CEZZ VHD1SS355//-1Y
BR BT —
BD
No change DUNTKC613WEF0 RUNTKA090WJZZ RUNTKA091WJZZ
J FORMATTER Unit J CMOS CAMERA Unit J PHOTO SENSOR Unit
CK BS AZ
AL AB AM AB AC AC AC AC AC AB AC AC AC AE AD AD AE AF AB
J Varistor
AD
COILS AND TRANSFORMERS
When you exchange a ballast unit (DUNTKD496WEF2), please order a ballast power supply unit (DSETUD496FMF2).
J BALLAST Control Unit
D10XB60H 1SS355 Diode, DXA073WJ 1SS355 Li114 RB160M40 RB160M40 D1FL20U Diode, DX0066GE Zener Diode, 27V Diode, DX0066GE Diode, DX0066GE D1FL20U Diode, DXA070WJ PC123Y82 PC123Y82 Diode, DX0459CE Diode, DX0469CE 1SS355
PACKAGED CIRCUIT å VA701 RH-VXA018WJN1
DUNTKD497FMF2
J J J J J J J J J J J J J J J J J J J
å L702 å L703 L705 T704 å T705
RCiLFA178WJZZ RCiLFA178WJZZ RCiLPA546WJZZ RCiLCA131WJZZ RTRNWA242WJZZ
C702 C703 C704 C705 C706 å C707
VCKYCY1HB103KY VCKYCY1HB102KY RC-EZA922WJZZ VCKYTV1EB474KY VCKYCY1EB333KY RC-FZA026WJZZ
J J J J J J
C708 C709 C710 å C711 å C712 C713 C714
VCKYCY1HB222KY RC-KZA271WJZZ RC-KZA275WJZZ RC-KZ0105GEZZ RC-KZ0105GEZZ VCKYTQ1HB224KY RC-FZA124WJZZ
J J J J J J J
å C715
RC-FZA026WJZZ
J
VCKYTV1EB104KY VCKYTV1EB104KY VCKYTV1HB103KY VCEA4A1VN476M+ VCEA4A1VN106M+ VCKYTV1HB222KY VCKYTV1HB471KY VCKYTV1HB103KY VCEA4A1HN105M+ RC-KZA050WJZZ
J J J J J J J J J J
J J J J J
Filter Coil Filter Coil Peaking Coil High Frequency Choke Coil Transformer
AK AK AH AW
CAPACITORS
C716 C717 C718 C720 C721 C722 C723 C724 C725 C726
24
0.01 50V Ceramic 1000p 50V Ceramic 330 420V Electrolytic 0.47 25V Ceramic 0.033 25V Ceramic 0.47 275V Metallized Plastic Film 2200p 50V Ceramic 470p 2kV Ceramic 1000p 2kV Ceramic 2200p 250V Ceramic 2200p 250V Ceramic 0.22 50V Ceramic 2.2 450V Metallized Plastic Film 0.47 275V Metallized Plastic Film 0.1 25V Ceramic 0.1 25V Ceramic 0.01 50V Ceramic 47 35V Electrolytic 10 35V Electrolytic 2200p 50V Ceramic 470p 50V Ceramic 0.01 50V Ceramic 1 50V Electrolytic 470p 3.15kV Ceramic
AA AA AU AC AA AE AA AC AD AD AD AC AG AE AB AB AA AC AC AA AA AA AB AD
XG-MB70X A Ref. No.
★
Part No.
Description
Code
Ref. No.
DUNTKD556WEF1
R765 R766 R767 R768
POWER SUPPLY UNIT (Continued) C727 C728 C730 C731 C732 C733 C734 å C735 C736 C737 C738 C739 C740 C741
VCEA4A1VN107M+ J 100 35V Electrolytic RC-FZ0010TAZZ J 0.01 630V Metallized Plastic Film RC-KZ0105GEZZ J 2200p 250V Ceramic RC-KZ0105GEZZ J 2200p 250V Ceramic RC-EZ1208CEZZ J 2200 10V Electrolytic RC-KZ0384CEZZ+ J 1000p 1kV Ceramic RC-KZ0384CEZZ+ J 1000p 1kV Ceramic RC-KZ0105GEZZ J 2200p 250V Ceramic VCKYTV1EB104KY J 0.1 25V Ceramic RC-EZ1238CEZZ J 1000 25V Electrolytic VCEA4A1VN476M+ J 47 35V Electrolytic RC-KZA111WJZZY J 1 25V Ceramic VCEA4A1VN106M+ J 10 35V Electrolytic RC-FZA126WJZZ J 0.1 450V Metallized Plastic Film
AC AC
RR-HZ0119CEZZY VRS-CY1JF153FY VRS-TQ2BD474FY VRS-TQ2BD474FY VRS-TQ2BD394FY VRN-TV1JD394DY VRN-TV1JD394DY VRN-TV1JD394DY VRN-CY1JF133DY VRS-CY1JF103JY VRD-RM2HD102JY VRS-CY1JF820FY VRS-SV2HC100JY RMPTKA001WJZZ VRS-CY1JF223JY VRD-RM2HD563JY VRD-RM2HD563JY VRS-TQ2EF100JY VRD-RM2HD563JY RR-WZA012WJZZ VRS-TQ2EF100JY RR-WZA012WJZZ VRS-CY1JF183JY VRS-TV1JD103JY VRS-TV1JD103JY VRS-TQ2BD153JY VRD-RM2HD221JY VRS-TQ2BD101JY VRS-TQ2BD102JY VRS-TQ2BD103JY VRS-TV1JD564JY VRN-VV3AB3R9J VRS-TV1JD564JY VRN-VV3AB1R8J VRS-TQ2BD103JY VRS-TQ2BD332FY VRS-VV3AB273J VRS-VV3AB273J VRS-VV3DB220J VRS-TQ2BD103JY VRS-TV1JD102JY VRS-TV1JD222FY VRS-TQ2BD102JY VRS-TV1JD101FY VRS-TQ2BD331FY VRS-TV1JD272FY VRS-TV1JD681FY VRS-TQ2EF221JY VRS-TQ2EF221JY VRS-TQ2EF681JY VRS-TQ2EF681JY VRN-TV1JD394DY VRS-TQ2EF101JY VRS-TQ2EF101JY
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
★
VRN-VV3AB1R8J VRN-TV1JD394DY VRS-TQ2EF470JY VRS-TQ2EF470JY
J J J J
Description 1.8 390k 47 47
1W 1/10W 1/4W 1/4W
Metal Film Metal Film Metal Oxide Metal Oxide
Code AA AB AA AA
MISCELLANEOUS PARTS å RY701 RRLYDA008WJZZ å F701 QFS-CA010WJZZ F705 QFS-TA005WJZZ FB704 RBLN-A007WJZZY FB705 RBLN-A007WJZZY FB706 RBLN-A007WJZZY FB707 RBLN-0020CEZZ+ å FH701 QFSHD1013CEZZ+ å FH702 QFSHD1014CEZZ+ P701 QPLGAA005WJZZ P702 QPLGN0269GEZZ P703 QPLGN0269GEZZ P704 QPLGNA049WJZZ P705 QPLGNB470WJZZ RDA701 PRDARA259WJFW RDA702 PRDARA297WJFW LUG702 QLUGHA002WJZZ E701 LANGQA025WJFW PRDARA303WJFW QCNW-E104WJQZ QCNW-E105WJPZ QCNW-E106WJPZ LX-BZ3100CEFN LX-BZA044WJFU XBSSN30P06000
AD AD AD AC AC AD AB AE AC AC AC AE
RESISTORS å R701 R702 R703 R704 R705 R706 R707 R708 R710 R711 R714 R715 R716 å R717 R718 R719 R720 R721 R722 R724 R725 R727 R728 R730 R731 R733 R734 R735 R736 R737 R738 R739 R740 R741 R742 R743 R744 R745 R746 R748 R750 R751 R752 R753 R754 R755 R756 R757 R758 R759 R760 R762 R763 R764
Part No.
High Voltage High Resistor AC 15k 1/16W Metal Oxide AA 470k 1/8W Metal Oxide AA 470k 1/8W Metal Oxide AA 390k 1/8W Metal Oxide AA 390k 1/10W Metal Film AB 390k 1/10W Metal Film AB 390k 1/10W Metal Film AB 13k 1/16W Metal Film AB 10k 1/16W Metal Oxide AA 1k 1/2W Carbon AA 82 1/16W Metal Oxide AA 10 1/2W Metal Oxide AB Cement/thermal Fuse AH 3.9 5W 22k 1/16W Metal Oxide AA 56k 1/2W Carbon AA 56k 1/2W Carbon AA 10 1/4W Metal Oxide AA 56k 1/2W Carbon AA 0.15 5W Resistor Wire AE 10 1/4W Metal Oxide AA 0.15 5W Resistor Wire AE 18k 1/16W Metal Oxide AA 10k 1/10W Metal Oxide AA 10k 1/10W Metal Oxide AA 15k 1/8W Metal Oxide AA 220 1/2W Carbon AA 100 1/8W Metal Oxide AA 1k 1/8W Metal Oxide AA 10k 1/8W Metal Oxide AA 560k 1/10W Metal Oxide AA 3.9 1W Metal Film AA 560k 1/10W Metal Oxide AA 1.8 1W Metal Film AA 10k 1/8W Metal Oxide AA 3.3k 1/8W Metal Oxide AA 27k 1W Metal Oxide AA 27k 1W Metal Oxide AA 22 2W Metal Oxide AA 10k 1/8W Metal Oxide AA 1k 1/10W Metal Oxide AA 2.2k 1/10W Metal Oxide AA 1k 1/8W Metal Oxide AA 100 1/10W Metal Oxide AA 330 1/8W Metal Oxide AA 2.7k 1/10W Metal Oxide AA 680 1/10W Metal Oxide AA 220 1/4W Metal Oxide AA 220 1/4W Metal Oxide AA 680 1/4W Metal Oxide AA 680 1/4W Metal Oxide AA 390k 1/10W Metal Film AB 100 1/4W Metal Oxide AA 100 1/4W Metal Oxide AA
25
J J J J J J J J J J J J J J J J J J J J J J J J J
Relay AG Fuse, T6.3AH/AC250V AF Thermal Fuse AG Ferrite Bead AC Ferrite Bead AC Ferrite Bead AC Ferrite Bead AB Fuse Holder AC Fuse Holder AC AC Plug, 2pin AL Lead Relay Plug, 2pin (BA) AB Lead Relay Plug, 2pin (BB) AB Lead Relay Plug, 10pin (BC) AD Lead Relay Plug, 4pin (BM) AD Heat Sink A AE Heat Sink A Lug AB Inlet Bracket AF Heat Sink B AH (Hf)Power-Main AM (Lf)Power-Sw AM Power-Ballast AR Screw, x4 AA Screw, x2 AA Screw, x4 AA
XG-MB70X A Ref. No.
★
Part No.
Description
Code
Ref. No.
DUNTKD496WEF2
R927 R928 R929 R930 R931 R932 R933 R934 R935 R936 R937 R938 R939 R940 R941 R942 R945 R946 R948 R949
BALLAST UNIT TRANSISTORS Q901 Q902 Q903 Q904 Q905 Q906
VS2SK2699++-1 VS2SK2699++-1 VS2SA2056++-1Y VS2SK2640++-1 VS2SA1530AR-1Y VS2SC3928AR-1Y
D902 D903 D904 D905 D906 D907 D908 D910 D911 D912 TH901
VHDRB160M40-1Y RH-DXA078WJZZ VHDU1JU44//-1Y VHSG1VB22C+-1 RH-DXA062WJZZY VHDFMVG2GS+-1 VHDFMVG2GS+-1 RH-DXA062WJZZY VHDU1JU44//-1Y VHD1SS355//-1Y RH-HXA020WJZZ
L901 L902 L903 T901 T902
RCiLPA137WJZZ RCiLCA119WJZZ RCiLPA475WJZZ RTRNZA102WJZZ RTRNWA188WJZZ
C901
RC-FZA215WJZZ
C903 C904 C908 C909 C912
VCKYCY1EB473KY RC-KZA111WJZZY RC-KZA450WJZZY RC-KZA450WJZZY RC-FZA123WJZZ
C913 C915 C917
RC-KZA378WJZZY VCKYCY1EF104ZY RC-FZA126WJZZ
C918 C919
RC-KZA275WJZZ RC-FZA126WJZZ
C920 C921 C922 C923
RC-KZA275WJZZ RC-KZA275WJZZ VCKYCY1HB103KY RC-EZA770WJZZ
R901 R902 R903 R904 R905 R908 R911 R912 R913 R914 R915 R916 R917 R918 R919 R920 R921 R922 R924 R925 R926
VRS-TV1JD334FY VRS-TV1JD334FY VRS-TV1JD334FY VRS-TV1JD123FY VRN-VV3ABR22J VRS-TQ2BD100FY VRS-TV1JD103JY VRS-TQ2EF220JY VRS-TQ2EF100JY VRS-TQ2BD000JY VRS-TQ2BD100FY VRS-TQ2EF181JY VRS-TV1JD103JY VRS-TQ2EF4R7JY VRS-TQ2EF4R7JY VRS-TQ2EF4R7JY VRS-TQ2EF4R7JY RR-WZA015WJZZ VRS-TV1JD224FY VRS-TV1JD224FY VRS-TV1JD224FY
J J J J J J
2SK2699 2SK2699 2SA2056 2SK2640 2SA1530AR 2SC3928AR
AR AR AE AN AB AB
DIODES AND THERMISTER J J J J J J J J J J J
RB160M40 Diode, DXA078WJ U1JU44 G1VB22C Diode, DXA062WJ FMVG2GS FMVG2GS Diode, DXA062WJ U1JU44 1SS355 Thermister
AC AQ AE AK AE AM AM AE AE AB AK
Peaking Coil High Frequency Choke Coil Peaking Coil Transformer Transformer
AF AX AK AH AK
AH AA AC AD AD AF AD AA AE AD AE AD AD AA AE
RESISTORS J J J J J J J J J J J J J J J J J J J J J
330k 330k 330k 12k 0.22 10 10k 22 10 0 10 180 10k 4.7 4.7 4.7 4.7 0.15 220k 220k 220k
1/10W 1/10W 1/10W 1/10W 1W 1/8W 1/10W 1/4W 1/4W 1/8W 1/8W 1/4W 1/10W 1/4W 1/4W 1/4W 1/4W 5W 1/10W 1/10W 1/10W
Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Film Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Resistor Wire Metal Oxide Metal Oxide Metal Oxide
VRS-TV1JD104FY VRS-TV1JD224FY VRS-TV1JD224FY VRS-TV1JD224FY VRS-TV1JD224FY VRS-TV1JD153FY VRS-TV1JD153FY VRS-TV1JD103JY VRS-TQ2BD102JY VRS-VV3DB273J VRS-TV1JD100JY VRS-CY1JF103JY VRS-TQ2EF102JY VRS-TV1JD103JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-TV1JD334FY VRS-TV1JD224FY VRS-TQ2EF4R7JY VRS-TQ2EF4R7JY
J J J J J J J J J J J J J J J J J J J J
Description 100k 220k 220k 220k 220k 15k 15k 10k 1k 27k 10 10k 1k 10k 10k 10k 330k 220k 4.7 4.7
1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/10W 1/8W 2W 1/10W 1/16W 1/4W 1/10W 1/16W 1/16W 1/10W 1/10W 1/4W 1/4W
Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide
Code AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA
MISCELLANEOUS PARTS
CAPACITORS J 1.8 450V Metallized Plastic Film J 0.047 25V Ceramic J 1 25V Ceramic J 470p 1kV Ceramic J 470p 1kV Ceramic J 1 450V Metallized Plastic Film J 1000p 630V Ceramic J 0.1 25V Ceramic J 0.1 450V Metallized Plastic Film J 1000p 2kV Ceramic J 0.1 450V Metallized Plastic Film J 1000p 2kV Ceramic J 1000p 2kV Ceramic J 0.01 50V Ceramic J 47 35V Electrolytic
★
CN902 QCNW-E190WJQZ FB901 RBLN-A007WJZZY FB902 RBLN-A007WJZZY P901 QPLGNB470WJZZ RDA901 PRDARA258WJFW PRDARA296WJFW LX-BZA044WJFU LX-BZ3049GEFN PSPAZA737WJZZ XBSSN30P06000
COILS AND TRANSFORMERS J J J J J
Part No.
AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AE AA AA AA
26
J J J J J J J J J J
Connecting Cord Ferrite Bead Ferrite Bead Lead Relay Plug, 4pin Heat Sink Heat Sink-C Screw, x2 Screw, x6 Spacer For Q901 Q902 Screw, x3
AU AC AC AD AG AK AA AB AK AA
XG-MB70X A Ref. No.
★
Part No.
Description
Code
Ref. No.
DUNTKD497FMF2 BALLAST CONTROL UNIT INTEGRATED CIRCUITS IC7701 IC7704 IC7705 IC7707 IC7709
VHiM51995AF-1Y VHiTA78L05F-1Y VHiBD4742G+-1Y RH-iXB384WJZZQ VHiNJM2902V-1Y
Q7701 Q7702 Q7703 Q7704 Q7705 Q7706 Q7707 Q7708 Q7709
VSDTA114EKA-1Y VSDTC114EKA-1Y VS2SC2712Y/-1Y VS2SC2712Y/-1Y VSDTC114EKA-1Y VSDTC114EKA-1Y VSDTC114EKA-1Y VS2SA1162Y/-1Y VS2SC2712Y/-1Y
D7701 D7702 D7703 D7704 D7705 D7706 D7711 D7712 å D7713 å D7714 å D7715
RH-EX1398CEZZY VHD1SS355//-1Y VHD1SS355//-1Y RH-EX1398CEZZY VHD1SS355//-1Y VHD1SS355//-1Y VHDDAN202K/-1Y VHDDAN202K/-1Y RH-FXA005WJZZY RH-FXA005WJZZY RH-FXA005WJZZY
J J J J J
M51995AFP TA78L05F BD4742G-TR UPD78F9177AGBNJM2902V
AM AE AD AY AD
TRANSISTORS J J J J J J J J J
DTA114EKA DTC114EKA 2SC2712Y 2SC2712Y DTC114EKA DTC114EKA DTC114EKA 2SA1162Y 2SC2712Y
AB AB AB AB AB AB AB AB AB
Zener Diode, 8.2V 1SS355 1SS355 Zener Diode, 8.2V 1SS355 1SS355 DAN202K DAN202K PC123ZY8 PC123ZY8 PC123ZY8
AB AB AB AB AB AB AB AB AD AD AD
PACKAGED CIRCUIT X7701
RCRMCA019WJZZY J Packaged Circuit
AF
CONTROL R7728 RVR-M4555CEZZY J Variable resistor, 10k
AC
CAPACITORS C7701 C7702 C7703 C7704 C7705 C7706 C7707 C7708 C7709 C7710 C7711 C7712 C7713 C7715 C7716 C7717 C7718 C7719 C7720 C7721 C7722 C7723 C7724 C7725 C7726 C7727 C7728 C7730 C7731 C7733 C7734 C7735 C7736
VCCCCY1HH681JY VCKYCY1CB224KY VCKYCY1EB473KY VCKYCY1EF104ZY VCKYCY1EF104ZY VCKYCY1EB104KY VCKYCY1HB222KY RC-KZA114WJZZY RC-KZA111WJZZY RC-KZA111WJZZY VCKYCY1AB105KY VCKYCY1CB104KY VCKYCY1HB102KY VCKYCY1EB103KY VCKYCY1EB333KY VCCCCY1HH681JY VCCCCY1HH331JY VCCCCY1HH331JY RC-KZA109WJZZY VCKYCY1EF104ZY RC-KZA114WJZZY RC-KZA114WJZZY VCKYCY1HF104ZY VCKYCY1EB223KY VCKYCY1EB223KY VCKYTV1CF105ZY VCKYCY1EF104ZY VCKYTV1CB105KY VCKYCY1CB224KY VCKYCY1HB102KY VCKYTV1CB105KY VCKYCY1HB222KY VCKYCY1HB102KY
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
680p 0.22 0.047 0.1 0.1 0.1 2200p 1 1 1 1 0.1 1000p 0.01 0.033 680p 330p 330p 10 0.1 1 1 0.1 0.022 0.022 1 0.1 1 0.22 1000p 1 2200p 1000p
50V 16V 25V 25V 25V 25V 50V 25V 25V 25V 10V 16V 50V 25V 25V 50V 50V 50V 16V 25V 25V 25V 50V 25V 25V 16V 25V 16V 16V 50V 16V 50V 50V
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
C7737 C7738 C7739 C7740 C7741 C7742 C7743 C7744 C7745 C7746 C7749 C7750 C7751
VCKYCY1EB103KY VCKYCY1HB222KY VCKYCY1EB223KY VCKYCY1EB103KY VCKYCY1AB105KY VCKYCY1HB222KY VCKYTV1EB104KY RC-KZA110WJZZY VCKYCY1CB104KY VCKYCY1EB103KY VCCCCY1HH331JY VCCCCY1HH331JY VCCCCY1HH331JY
R7701 R7702 R7703 R7704 R7705 R7706 R7707 R7708 R7709 R7710 R7711 R7712 R7713 R7714 R7715 R7716 R7717 R7718 R7719 R7720 R7721 R7722 R7723 R7724 R7725 R7726 R7727 R7729 R7730 R7731 R7732 R7733 R7734 R7735 R7736 R7737 R7738 R7739 R7740 R7741 R7742 R7743 R7745 R7746 R7747 R7748 R7749 R7750 R7751 R7752 R7753 R7754 R7755 R7757 R7758 R7759 R7760 R7761 R7762 R7763 R7764
VRS-CY1JF472JY VRS-TV1JD331JY VRS-CY1JF563JY VRS-CY1JF243JY VRS-CY1JF101JY VRS-CY1JF102JY VRS-CY1JF102JY VRS-CY1JF103JY VRS-CY1JF102JY VRS-CY1JF472JY VRS-CY1JF103JY VRS-CY1JF101JY VRS-CY1JF182JY VRS-CY1JF123JY VRS-TV1JD1R0JY VRS-CY1JF103JY VRS-CY1JF151JY VRS-CY1JF622JY VRS-CY1JF102JY VRS-CY1JF103JY VRN-CY1JF122DY VRS-CY1JF682JY VRS-CY1JF103JY VRN-CY1JF153DY VRS-CY1JF332DY VRS-CY1JF622JY VRS-CY1JF302JY VRN-CY1JF102DY VRN-CY1JF102DY VRS-CY1JF222JY VRN-CY1JF682DY VRS-CY1JF222DY VRS-CY1JF472JY VRS-CY1JF102JY VRS-CY1JF472JY VRS-CY1JF472JY VRS-CY1JF153JY VRS-CY1JF102JY VRS-CY1JF153JY VRS-CY1JF153JY VRS-CY1JF303JY VRS-CY1JF101JY VRS-CY1JF103JY VRS-CY1JF153JY VRS-CY1JF303JY VRS-CY1JF103JY VRS-CY1JF303JY VRS-CY1JF153JY VRS-CY1JF303JY VRS-TQ2BD4R7JY VRS-TQ2BD4R7JY VRS-CY1JF153JY VRS-CY1JF000JY VRS-CY1JF303JY VRS-CY1JF153JY VRS-CY1JF100JY VRS-CY1JF303JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-CY1JF102JY VRS-CY1JF102JY
J J J J J J J J J J J J J
Description 0.01 2200p 0.022 0.01 1 2200p 0.1 10 0.1 0.01 330p 330p 330p
25V 50V 25V 25V 10V 50V 25V 25V 16V 25V 50V 50V 50V
Code
Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
AA AA AA AA AB AA AB AD AB AA AA AA AA
Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Film Metal Oxide Metal Oxide Metal Film Metal Oxide Metal Oxide Metal Oxide Metal Film Metal Film Metal Oxide Metal Film Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide
AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AB AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA
RESISTORS
DIODES J J J J J J J J J J J
★
Part No.
AB AB AA AA AA AB AA AB AC AC AB AB AA AA AA AB AA AA AC AA AB AB AA AA AA AB AA AC AB AA AC AA AA
27
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
4.7k 330 56k 24k 100 1k 1k 10k 1k 4.7k 10k 100 1.8k 12k 1 10k 150 6.2k 1k 10k 1.2k 6.8k 10k 15k 3.3k 6.2k 3k 1k 1k 2.2k 6.8k 2.2k 4.7k 1k 4.7k 4.7k 15k 1k 15k 15k 30k 100 10k 15k 30k 10k 30k 15k 30k 4.7 4.7 15k 0 30k 15k 10 30k 10k 10k 1k 1k
1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/10W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/8W 1/8W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
XG-MB70X A Ref. No.
Part No.
★
Description
Code
Ref. No.
DUNTKD497FMF2 BALLAST CONTROL UNIT (Continued) R7765 R7767 R7769 R7770 R7771 R7772 R7773 R7774 R7775 R7776 R7777 R7778 R7779 R7780 R7781 R7783 R7784 R7785 R7786 R7789 R7790 R7791 R7792 R7793 R7794 R7795 R7796
VRS-CY1JF103JY VRS-CY1JF102JY VRS-CY1JF472FY VRS-CY1JF472FY VRS-CY1JF103JY VRS-CY1JF102JY VRS-CY1JF472JY VRS-CY1JF102JY VRS-CY1JF472JY VRS-CY1JF102JY VRS-CY1JF472JY VRS-CY1JF333JY VRS-CY1JF101JY VRS-CY1JF101JY VRS-CY1JF102JY VRS-CY1JF471JY VRS-CY1JF471JY VRS-CY1JF103JY VRS-CY1JF101JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-CY1JF103JY VRS-CY1JF100JY VRS-CY1JF100JY VRS-CY1JF100JY
J J J J J J J J J J J J J J J J J J J J J J J J J J J
10k 1k 4.7k 4.7k 10k 1k 4.7k 1k 4.7k 1k 4.7k 33k 100 100 1k 470 470 10k 100 10k 10k 10k 10k 10k 10 10 10
1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W 1/16W
Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide Metal Oxide
AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA AA
MISCELLANEOUS PARTS P7701 QPLGN0864TAZZY J Lead Relay Plug, 8pin (BS) AE P7702 QPLGN0564TAZZY J Lead Relay Plug, 5pin (EB) AC
28
Part No.
★
Description
Code
XG-MB70X A Ref. No.
Part No.
★
Description
Code
Ref. No. 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
CABINET AND MECHANICAL PARTS 1 1-1 1-2 1-3 1-4 1-5
Not Available DBDYTA072WJF0 GCOVAA949WJSA GCOVAA948WJSA PFiLDA015WJZZ XEBSN30P12000
– J J J J J
Top Body Ass'y Top Body Ass'y A/F Cover R/C Cover Front R/C Filter Screw, x2 for Lens Cover
— BB AE AE AD AA
2 2-1 2-1-1 2-1-2 2-1-3 2-1-4 2-1-5 2-1-6
Not Available DBDYUA172WEF0 Not Available LANGFA025WJFW LX-NZ3120CEFW LX-NZ3122CEFW LX-NZ3144CEFW Not Available
– J – J J J J –
Bottom Body Ass'y Bottom Body Ass'y Bottom Body Kensington Angle Outsertnut M5_R Outsertnut M5_L Lamp Door Nut Tefron Tape, x2
— BH — AC AB AC AC —
2-2 2-2-1 2-2-2 2-2-3 2-2-4 2-2-5
CDORUA023WJF0 Not Available LX-BZ1009CEFN MSPRC0023SEFW XRESJ30-06000 Not Available
J – J J J –
Lamp Door Ass'y Lamp Door Screw, for Lamp Door Spring E-Ring Tefron Tape
AR — AE AB AA —
2-3 2-4 2-5 2-6 2-7 2-8 2-9 2-10 2-11 2-12 2-13 2-14 2-16 2-17
GCOVAA299WJSA GLEGPA029WJKA GLEGPA030WJSA GLEGPA031WJSA LANGFA113WJFW LANGFA114WJFW LHLDZA416WJKZ LX-BZA067WJFN LX-HZ3105CEFN LX-NZ3095CEFN LX-NZ3123CEF9 LX-NZA003WJFW QEARPA134WJFW XEBSN30P12000
J J J J J J J J J J J J J J
R/C Cover Adjuster (Front) Adjuster (R_R) Adjuster (R_L) Bracket A Bracket B Adjuster Holder Screw, x4 for Ceiling Nut Screw, x2 for Adjust Holder 2-12 2-13 Ceiling Nut, x4 Bottom Earth Screw, x2 for Lens Cover
AD BA AK AK AE AF AF AB AB AB AD AD AL AA
3 3-1 3-1-1 3-1-2
Not Available DBFL-A017WJF0 Not Available Not Available
– J – –
Speaker Holder Ass'y Speaker Holder Ass'y Speaker Holder Tefron Tape, x3
— AK — —
3-2 3-3 3-4 3-5
LANGSA006WJFW RSP-ZA085WJQZ XEBSN20P06000 PSPAHA464WJZZ
J J J J
Speaker Bracket, x2 Speaker Screw, x2 for Speaker Bracket Speaker Holder Sheet
AD AP AA AE
4
Refer to the OPTICAL MECHANISM PARTS
23 23-1 23-2 23-3
DUNTKC612WEF5 LX-BZ3266CEFN PCOVUA044WJ00 PSLDMA441WJFW
J J J J
25 26
DUNTKC615WEF5 DUNTKC681WEF5
J FRONT R/C Unit J REAR R/C Unit
AN AN
27 28 29 30 31 32 33 34 35 36 37 38
DUNTKD556WEF1 LHLDFA024WJKZ LHLDFA025WJKZ LHLDW1220CEZZ LX-BZ3100CEFN LX-BZA143WJF7 LX-BZA144WJF9 NFANRA061WJ00 PSLDMA872WJFW PSLDMA873WJFW PSLDMA874WJSA PZETKA166WJKZ
J J J J J J J J J J J J
BR AD AC AD AA AB AB AS AN AV AF AP
39
DSETUD496FMF2
J BALLAST POWER Unit
MAIN Unit Screw, x4 Light Shield Terminal Shield
POWER SUPPLY Unit MAIN PWB Suport POWER PWB Suport Edge Saddle Screw Screw, for Power Saddle x7 Screw, for Power Fan x2 Power Fan Power Shield Top Power Shield Bottom Fan Shield Power Insulation
CU AB AE AM
BT
29
Part No. DUNTKD496WEF2 DUNTKD497FMF2 RUNTKA090WJZZ JBTN-A328WJKA LANGKA329WJFW LHLDWA032WJZZ LHLDZA409WJKZ CHLDZA410WJF0 LX-BZA085WJFN PCAPHA021WJSA PDUC-A056WJKZ PSHEPA232WJZZ PSLDCA019WJFW PSLDMA442WJFW PZETKA098WJKZ PZETKA110WJKZ QCNW-C667WJPZ QCNW-C671WJPZ QCNW-C939WJPZ XBBSN30P08000 XBPSN30P08JS0 XBPSN40P08JS0 XEBSN30P12000 XEBSN30P08000
★ – J J J J J J J J J J J J J J J J J J J J J J J
Description
Code
BALLAST Unit BALLAST Control Unit Af Ccd Unit Adjuster Button Switch Bracket Edge Saddle A/F Holder A A/F Holder B Screw, PWB x7/BA x4/DM x2 Lens Cap Duct Power Shield Sheet Ccd Shield Ballast Shield Ballast Insulat R/C_Insulator Connecting Cord Connecting Cord (PA) Power Sw Connecting Cord Screw, AC x2 Ter x2 MK x1 Screw Screw, Bot/Opt Screw, x2 for Lens Cover Screw, RCA
— BD BS AH AF AD AF AF AB AL AH AG AD AP AS AC AH AZ AC AA AB AC AA AA
XG-MB70X A
CABINET AND MECHANICAL PARTS 1
H
Z
1-1
32
35
G 28 1-3
28 1-4 48 1-2
1-5
23-1 E D G F
H
27
23-3 23-2
C
30
31
48
F 23 60
48
23-1
48
a Q
B
A
I
55 V
R
50
56
A
P
N M Y L
O b
26
D
38
33 K
E
37
62
V
29
J
X
E
P
62
36
34
39 40 4
51 B
52 42 47
D
62
62
49
J
45
a
57
54
53
41
46
C 58 I
2-1-4
2-8 2-1-1
44 59
2-17
2-10
2-1-2
62
C
2-17
2-13 2-3
62
29
2-10
59 48
2-7
63 Z
X 2-12
b
2-1-3 62
K
2-1-5
2-16
2-17
2-11
2-1-6
2-14
3
2-14
B
3-4
2-11 2-9
25 43
L 3-2
2-1
3-1 3-4
2-2-5 2-4
2-2
3-2
2-5
2-6
2-2-4
3-1-2 3-3
3-5 3-1-2
A
61 2-2-1
2
3-1-2
62
2-2-3
3-1-1
2-2-2
1
2
3
4
30
5
6
XG-MB70X A Ref. No.
Part No.
★
Description
Code
Ref. No. 38 39 42 43 44 48 49 55 56 58 59
OPTICAL MECHANISM PARTS 4 4-1
CCHSKA016WJ31 LCHSKA016WJFW
J Optical Mecha J Main Frame
EC BP
4-2-1 4-2-2 4-2-3 4-2-4
LX-EZA018WJFN PCOVPA024WJSA PLNS-A046WJZZ RMOTBA005WJZZ
J J J J
Screw, for Z/F Motor x4 Focus Ring Pj Lens Ass'y Z/F Motor Ass'y
AC AY CT BS
4-3 4-4 4-5 4-7 4-8 4-10 4-11 4-12 4-13 4-16 4-17 4-18 4-19 4-20 4-21 4-22 4-23 4-24 4-25 4-26 4-27 4-28 4-29 4-30 4-31 4-32 4-33 4-34 4-35 4-36 4-37 4-38 4-39 4-40 4-41 4-42 4-43 4-44 4-45 4-46 4-48 4-49 4-50 4-51 4-52 4-53 4-54 4-55 4-56 4-57 4-58 4-59 4-60 4-61 4-62 4-63 4-64 4-66 4-68
CFiLWA086WJ02 LANGKA291WJFW LANGKA404WJFW LANGKA408WJFW LHLDZA389WJFW LHLDZA518WJFW LX-AZA001WJ00 LX-BZA090WJF9 LX-EZA019WJFN MSPRPA041WJFW NFANRA034WJZZ NFANRA035WJZZ NFANSA017WJZZ PCOVMA018WJFW PCOVZA038WJFW PCOVZA039WJFW PCOVZA040WJKZ PCOVZA044WJFW PCOVZA049WJKZ PCOVZA050WJFW PDUC-A050WJKZ PDUC-A051WJKZ PDUC-A055WJKZ CFiLWA082WJ01 PLNS-A047WJZZ CLNS-A048WJ01 CLNS-A051WJ01 CMiR-A101WJ01 PSLDHA031WJFW PSLDPA022WJFW PSLDPA027WJFW PSLDPA028WJFW PSLDPA029WJFW PSPAGA245WJZZ PSPAGA246WJZZ PSPAZA511WJZZ PSPAZA584WJZZ PSPAZA589WJZZ PSPAZA590WJZZ PSPAZA603WJZZ RH-HXA005WJZZ QCNW-C720WJQZ QCNW-D665WJQZ CMOTBA006WJ01 RUNTKA091WJZZ XWHSN20-03050 XBPSN20P04J00 XBPSN20P06J00 XBPSN25P04JS0 XBPSN25P10JS0 XBPSN30P06000 XBPSN30P35JS0 XEBSN20P04000 XEBSN30P08000 XSBSN14P03000 XSBSN20P04000 XSPSN17P02500 XSPSN20P04000 XWHUW40-03000
J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
CW Au Al-Cap CW Angle AM Temp Fuse Angle AH Frame Plate AX Lens Hold AQ Field Lnse Hold BB Screw, for Field Lens Spring x4 AC Screw, Exhaust Fan x8 AX Screw, for Focus Ring x3 AD Fl Spring AT Exhaust Fan2 BG Exhaust Fan1 BG Lamp Fan BG Dust Proof Plat AK Frame Cover L AR C/W Cover AR Lamp House BG Frame Plate AM Exhaust Fan Sheet x2 AV Lamp Duct Cover AK Exhaust Duct BB Lamp Duct B AQ Lamp Ex Duct AR UV Filter Ass'y BD Field Lens BK Relay Lens Ass'y BQ Rod Ass'y BU Mirror Ass'y BF House Syanetu AK Frame Apch AK F Lnse Shading AV DMD Apature AR Syakouita A AR Anti Vib Rubber x3 BC Exhaust Fan Spacer x16 AY Ring Bush CW x3 AP F Lens Packing D AS F Lens Packing C x4 AK Dustproof Plate AW Blind Seal x2 AF Temperature Sensor AK P Sensor Wire AM Temp Huse Wire AR Iris Ass'y BL P Sensor Unit AZ FP Washer x1 Screw, for Ep x1 Rod x2 CW x3 AD Screw, for Fl Hold x2 AD Screw, for UV Filter Hold AD Screw, for CW x3 Pj-Lens x4 AD Screw, for Lamp Duct1 Fuse AA Screw, for Lamp Fan Fix x2 AD Screw, for Lamp Hs Heat Pl AB Screw, RCA AA Screw, for DMD Aperture x3 AD Screw, for Frame Plate x2 AD Screw, for Iris Motor Fix x2 AD Screw, for CW RD Mirror Fram AC CW Washer x3 AK
5
AN-MB70LP
– Lamp Unit (Option)
—
24 34
DUNTKC613WEF0 LHLDZA384WJFW
J FORMATTER Unit J Backer Plate
CK AM
31
Part No. MSPRPA039WJFW NSFTZA101WJFW PRDARA124WJFW PRDARA125WJFW PSHEGA031WJKZ PSPAZ0445CEZZ PSPAZA479WJZZ QSOCZA081WJZZ RDMDPA014WJZZQ XBPSN30P08JS0 XBPSN30P12JS0
★ J J J J J J J J J J J
Description
Code
Stud Spring Shaft, x2 Heat Spreader Stud Thermal Pad Spacer, x2 Kapton Insulator C-Spring Dmd 0.7 XGA Screw, Stud x2 Blst_Socket x2 Screw, for DMD Unit x2
AL AE AY AL AF AC AL BA EK AB AB
XG-MB70X A Part No. ★ Description Code Ref. No. OPTICS MECHANISM PARTS
Ref. No.
★
Part No.
Description
Code
H
39 48 4-25
58
59 4-12 4-41
G
G
4-12
43
4-48
F
34
4-61
4-41 4-18
48 39
H
38 4-29
4-27
56
55
4-58
4-17
24
4-58
F
42
44
49
4-46
4-66
4-23 d
4-66
4-22
4-66
U
4-50
T
Q 4-5
4-58
E
4-24
S
4-21
4-35 4-43 4-55
4-60
W 4-44 4-11
4-45 4-38
4-10 4-31 4-16 5
D
4-62
4-37 f
4-66
4-54
4-8 4-56
4-53 4-66
4-30 4-54 R 4-66 4
C
O
4-49
4-36
4-33
4-63 4-32
4-57
4-52
U
4-68
4-3
T
4-40 4-39
4-34
4-66
4-7
4-42
W
4-54
4-20 f
S
4-28
4-4
d 4-26
Y
N 4-57
B
4-2-3 4-1
4-19 4-64 M
4-51
4-2-1
4-13
4-59
4-2-4
4-2-2
4-2-1
A
1
2
3
4
32
5
6
XG-MB70X A Ref. No.
Part No.
★
Description
Code
Ref. No.
å X1 å X1 å X1 X2 X3 X4 X5 X6 X7 X8 X9 X10 X11 X12 X13 X14 X15 X15 X15 X15 X16 X16 X16 X17 X17 X17
QACCDA007WJPZ
J AC Cord for U.S., Canada, etc. AR (XG-MB70U A) QACCVA011WJPZ J AC Cord for Europe, except U.K. AT (XG-MB70E A) QACCBA036WJPZ J AC Cord for U.K., AX Hong Kong and Singapore (XG-MB70K A) QACCLA018WJPZ J AC Cord for Australia, AU New Zealand and Oceania (XG-MB70K A) RRMCGA313WJSA J Remote Control BA QCNWGA045WJPZ J RGB Cable AU QCNWGA014WJPZ J USB Cable AQ GCASNA014WJSA J Storage Case AZ UDSKAA072WJZZ J CD ROM (Instruct) AL TLABZA717WJZZ J "Quick Guide" Label AF TiNS-C177WJZZ J Operation Manual AH SSAKA0160CEZZ J Polystylene Bag AB SSAKAA037WJZZ J Polystylene Bag AE TLABV0003SEZZ J MO Name Label AB TLABVA333WJZZ J Bar Code Label AB TLABZA255WJZZ J ER Sticker (XG-MB70U A) AE TLABZA734WJZZ J MAC Address Label AZ TGAN-A019WJZZ J SECL Warranty AF (XG-MB70U A) TGAN-A232WJZZ J SEC ER Infomation AC (XG-MB70U A) TGAN-A233WJZZ J SECL ER Information AC (XG-MB70U A) TGAN-A325WJZZ J SEC Warranty AB (XG-MB70U A) TCAUZA187WJZZ J WEEE Sheet AC (XG-MB70E/K A) TCAUZA155WJZZ J Caution Sheet AA TCAUZA143WJZZ J System Lock Caution AA TLABZA610WJZZ J Recycle Label AC (XG-MB70E A) TLABZA956WJZZ J WEEE Label AB (XG-MB70E/K A) TLABZA957WJZZ J Cw Label, x2 AB (XG-MB70E/K A)
S1 S2 S3 S4
(2)
For U.S., Canada, etc. (6' (1.8 m)) QACCDA007WJPZ
For Europe, except U.K. (6' (1.8 m)) QACCVA011WJPZ
(3)
For U.K., Hong Kong and Singapore (6' (1.8 m)) QACCBA036WJPZ
Remote Control RRMCGA313WJSA
X6 Projector Manual and technical reference CD-ROM UDSKAA072WJZZ
X3
RGB Cable (9'10" (3.0 m)) QCNWGA045WJPZ
X7 "Quick Guide" Label TLABZA717WJZZ
X4
USB Cable (9'10" (3.0 m)) QCNWGA014WJPZ
Code
SPAKCC355WJZZ SPAKFA577WJZZ SPAKPA360WJZZ SPAKXA533WJZZ
– – – –
Packing Case Accessories Case Polystylene Cover Buffer Material
— — — —
(Use For Servicing) QCNW-5869CEZZ QCNW-C516WJQZ QCNWKA002WJZZ QCNWKA005WJZZ QCNWKA006WJZZ QCNWKA007WJZZ QCNW-E008WJZZ RUNTZA018WJZZ
(4)
For Australia, New Zealand and Oceania (6' (1.8 m)) QACCLA018WJPZ
* Use the power cord that corresponds to the wall outlet in your country. X2
Description
SERVICE JIGS
X1 AC Cord* (1)
★
PACKING PARTS (NOT REPLACEMENT ITEM)
SUPPLIED ACCESSORIES å X1
Part No.
X5
Storage Case GCASNA014WJSA
X8 Operation Manual (this manual) TiNS-C177WJZZ Lens Cap (attached) PCAPHA021WJSA
33
J Extension Cable 120pins, Main-Formatter J Extension Cable 3pins, Main-Fan J Extension Cable 3pins, Main-Fan J Extension Cable 4pins, Main-Fan J Extension Cable 4pins, Main-Fan J Extension Cable 16pins, Main-Power J Extension Cable 3 to 2pins, Adjustment Jig to Lamp J Adjustment Jig, for the Ballast Unit
CL AG AS AX AX BL AT DR
XG-MB70X A Ref. No.
Part No.
★
★
Description
Code No. Part No. PACKING OFRef. THE SET
Description
X9 X6 X7 X8 X11 X12 X13 X14 X15 X16
X1
X4 X10 X5
X3 X2
S2
S3
S4
S1
34
Code
XG-MB70X A
35
XG-MB70X A
COPYRIGHT © 2005 BY SHARP CORPORATION ALL RIGHTS RESERVED.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.
TQ1970-S Dec. 2005 Printed in Japan Design and Production Information Design : JAPAN Production : NSEC MY. KD
SHARP CORPORATION AV Systems Group CS Promotion Center Yaita, Tochigi 329-2193, Japan
