MiniDAP is a digital audio player in a CD quality stereo digital sound compact enclosure with an integrated amplifier of 2 x 10W. The total ab-
Highly reliable. Storage on EPROM. No moving parts
sence of mechanical parts in its deRS232 or discrete control sign (storing on Eprom) guarantees absolute reliability.
No running costs
Besides functioning as audio players, Seamless loop they integrate various
automated
functions allowing you to control the
Compact stand-alone unit
environment (lighting, electric doors, Multi-language capability etc…) in synchronization with the sound.
Two years warranty
They are built to replace CD players wherever reliability is a decisive factor, and specially for autonomous audiovisual shows.
Commercial Division
Manufacturer
RSF EUROPE S.A. 18, rue de l'industrie (Z.I. de Windhof) L- 8399 Koerich (G.D. Luxembourg) Tél : +352/49 74 20 Fax : +352/29 63 70 E-MAIL:
[email protected]
RSF 45,Avenue Marcel Dassault (Parc de la Plaine) 31500 Toulouse - France Tél : +33-5/61207909 Fax : +33-5/61800094
Technical Specifications Audio parameters Audio format .........................................16 bits CD quality audio compression using Musicam MPEG 1/2 Layer II Bandwidth ............................................ 20Hz to 20KHz Distorsion ............................................. Below 0,01% Dynamic ................................................ 92 db Amplifier power ..................................... 2 x 10 W (8 Ohm) ou 1 x 20W (4 Ohm) General parameters Recording time capacity ....................... 1H30 maximum (using ExA extension board) Number of messages ............................ 32 (maximum) Storage support .................................... EPROM (1 to 21 dependant of the capacity needed) Connectors Output (line level - low imp.10 Ohms) ...Jack Fem.6,3mm (2X) Loudspeakers output............................. 5 pin male connector Headset output...................................... Jack Fem.3,5mm Control and bus .....................................SUB-D15 Fem. - 5 dry contact input ports - 4 outputs (analog 5V/10mA) - bidirectional RS232 - audio bus Power IN ...............................................BT Buttons Start/Stop ..............................................1 Volume G/D (-10 to +15 dB)..................Potentiometer (2) Indicators Playing ..................................................1 red led Programming ...................................................via software "ProDAPROM" RSF on MAC OS Fonctionnalities...............................................The messages can be triggered via - 5 input ports (dry contact or analog) - RS232 (up to 32 messages) - button on front face Control : each output port (5 analog ports or 32 in RS232) can generate a triggering signal synchronized on the audio message with a precision of 0,001 sec. Adjustable temporizing by software for the start of each sequence Audio bus input for mixing (e.g. for a multi-language use) Power supply...................................................12V - AC 0,5A (included) Maximal consumption ....................................0,75 W Enclosure.........................................................Beige and black plastic Dimensions......................................................158 x 250 x 45 mm (L x D x H) Weight .............................................................450 gr. Environnement Temperature .........................................0°C(32°F) to 50°C(122°F) Relative Humidity ..................................0-90% Warranty .........................................................2 years
Optionnal accessoires Réf. MemoIR ................IR control Interface to control any infra-red device in synchronization with an audio message Réf. MemoDMX............DMX control Interface for the synchronization of a lighting show with a message Réf. CAreRS ................16 relay output card (for the synchronization of motors, animatronics, doors,…) Réf. MultiAMP ..............Power amplifier 4x20W Réf. CamIRS ................15 input/1 stop message triggering interface Réf. RadarIR ................Infra-red radar kit for message triggering Réf. ExA .......................Memory extension board 7 Eproms Réf. ExB .......................Memory extension board 14 Eproms
