Starting âsetup.exeâ distributed with your program. (Doubleclick setup.exe). After installation you can find in the START menu from WINDOWS the following item:.
1: Running setup (Remove old version Scripter first !) ·
Running setup can be performed by : Starting “setup.exe” distributed with your program. (Doubleclick setup.exe)
2: Setting up Download Method.
LDK TRAINING CENTER
The Scripter
After installation you can find in the START menu from WINDOWS the following item: Select in the Programs menu:
Thomson MultiMedia Utils / Download_Method When opening this file you will see the following menu => Here you can select the type of Download Method. rs232
(Page 2)
= Download via RS232 * Application and Firmware from Camera - Adaptor - LCP - Basestation * Boot software from OCP400 - Basestation
ethernet = Download via the Network (C2IP) Application and Firmware from Basestation - OCP 400 - MCP400
(Page 3)
101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
Page 1 of 4 101010 110011 100011 111000
101010 110011 100011 111000
Running a script can be done by double-clicking a file with extension “*.tsc”. The installation program create an association with the LDKscripter. Simply follow the instructions presented to you.
Example : Udating your Camera Application Software.
Suppose you obtained the following two files from Thomson Multimedia: step 1 Doubleclick the “392240740201_165_001_S11.tsc” file (can be identified by camera icon)
A splashscreen shows you information about your LDKScripter version.
The following messagebox is presented indicating you have to switch of your LDK-device connected to your com-port, press Ok and switch back on your LDK-device.
LDK TRAINING CENTER
3a: Running a script in RS232 mode.
After the connecting phase was succesfull the actions descibed inside the script will be handled.
The application will quit after all commands were processed. To check if all commands were processed succesfully
Page of 4 101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
101010 110011 100011 111000
Running a script can be done by double-clicking a file with extension “*.tsc”. The installation program created an association with the LDKscripter. Simply follow the instructions presented to you.
Example : Udating your Basestation Application Software.
Suppose you obtained the following two files from Thomson Multimedia: step 1 Doubleclick the “392240738031_165_001_S07.tsc” file (can be identified by camera icon)
A splash screen shows you information about your LDKScripter version.
This messagebox is presented will give you the infomation from all via Ethernet connected devices. (OCP 400 - MCP 400 - Basetation 450x). Select here the device that need the update
LDK TRAINING CENTER
3b: Running a script in Ethernet mode. (see also page 1)
Remark: It is possible to run a next download when the previous download is still running. Each time you need to restart the “*.tsc” file
The following messagebox is presented indicating you have to switch of your LDK-device connected to your com-port, press Ok and switch back on your LDK-device. After the connecting phase was succesfull the actions descibed inside the script will be handled. The application will quit after all commands were processed. To check if all commands were processed succesfully Page of 4 101010 110011 100011 111000
