2D Debus & Diebold Meßsysteme GmbH, Alte Karlsruher Str. 8, D-76227 Karlsruhe Tel.: +49(0)721 94485-0 Fax.: +49(0)721 94485-29
Dorna Flag Indicator (preliminary)
Key Features: visualisation of all Dorna flag signals received through Dorna Transponder X2 CAN BUS connection 10 individually programmable multi-color LEDs 7 different colors automatic brightness control through ambient light sensor plug & play - ready to use Data transfer via USB-Stick
Options:
logger function, identically with USB Stick CAN Memory (LG-CANStickxC-000) shift light function section/lap time gain indicator fully programmable through USB-connection
The specifications on this document are subject to change at 2D decision. 2D assumes no responsibility for any claims or damages arising out of the use of this document, or from the use of modules based on this document, including but not limited to claims or damages based on infringement of patents, copyrights or other intellectual property rights.
10.7.2013/LK
2D Debus & Diebold Meßsysteme GmbH http://www.2D-datarecording.com http://www.2D-Kit-System.com
[email protected]
2D Debus & Diebold Meßsysteme GmbH, Alte Karlsruher Str. 8, D-76227 Karlsruhe Tel.: +49(0)721 94485-0 Fax.: +49(0)721 94485-29
Dorna Flag Indicator (preliminary) Technical specifications CAN characteristics CAN Line CAN termination CAN powered Baud rate (changeable) preset to
1 no yes 125/250/500/1000
kBaud
Environmental data Ambient operating range Protection class Humidity
°C %
Operation mode status indicator LED Storage characteristics Internal storage
V
8 - 16
mA
400
mA
55
mm g
62x 32.5x 15 66
1000
-20 to +60 IP67 5 to 95
red and green blinking
MB
Electrical characteristics Supply voltage Current consumption max, 10 LEDs white (@12V) Current consumption min, LEDs off (@12V)
16
Mechanical characteristics Aluminum housing Dimensions Weight Cable CAN line Wire cross section Type Length Connector type USB line Connector type
4 x AWG24 Raychem DR25 mm 400 Binder 712, 5PM USB Typ A, socket
Ordering information For ordering this product contact 2D. Dimensions
Connector layout CAN line, Binder Pin 1 2 3 4 5
712 5PM Name CAN Hi CAN Lo GND KL15 Vext/KL30
USB, Type A socket Pin Name 1 VCC 2 GND 3 Data + 4 Data -
Connector type
Description CAN High CAN Low Ground Switched power Power supply 8- 16V
Color white green black yellow red
Description Power supply +5V Ground Data line + Data line -
Color red black green white
The specifications on this document are subject to change at 2D decision. 2D assumes no responsibility for any claims or damages arising out of the use of this document, or from the use of modules based on this document, including but not limited to claims or damages based on infringement of patents, copyrights or other intellectual property rights.
10.7.2013/LK
1
5
2
4 3
Front view
Front view
2D Debus & Diebold Meßsysteme GmbH http://www.2D-datarecording.com http://www.2D-Kit-System.com
[email protected]
2D Debus & Diebold Meßsysteme GmbH, Alte Karlsruher Str. 8, D-76227 Karlsruhe Tel.: +49(0)721 94485-0 Fax.: +49(0)721 94485-29
Dorna Flag Indicator (preliminary) Flag Signals Green Flag Yellow Flag Red Flag Blue Flag White Flag White Flag with diagonal Red Cross Yellow and Red Striped Flag Chequered Black/White Flag
Black Flag
tbd
Black Flag with Orange Disc
tbd
PENALTY: Go to Position
tbd
PENALTY: Ride Through
tbd
LEDs off LEDs white/red flashing
Optional custom made versions on request like different housings (carbon,…) different designs (ducting,…)
The specifications on this document are subject to change at 2D decision. 2D assumes no responsibility for any claims or damages arising out of the use of this document, or from the use of modules based on this document, including but not limited to claims or damages based on infringement of patents, copyrights or other intellectual property rights.
10.7.2013/LK
2D Debus & Diebold Meßsysteme GmbH http://www.2D-datarecording.com http://www.2D-Kit-System.com
[email protected]