ASSEMBLY INSTRUCTIONS/ INSTRUCCIONES DE INSTALACIÓN/ INSTRUCTIONS DE MONTAGE B.
A.
A
D B
F E
1 PC/ PZ/ PIECE
C
!
C.
D. 1 PZ
Important: Do not tighten screws until you have completed assembly. Importante: No apriete los tornillos hasta que termine el ensamble Important: Ne serrez pas les vis jusqu'à ce que vous avez terminé l'assemblage
2.
1 PAIR/ PAR/ PAIRE
E.
Adjust leg glides by turning to level Ajuste la pata girando al nivel Ajustez les glissements des pieds en se tournant vers le niveau
from the chair and lean back to recline. To lock chair in upright position, push lever back towards the chair. Pull the arm to backwards & forward. D. Arm angle ...
side of the seat. To lower the seat height, lift the lever (A) while sitting in the chair. B.Tilt tension. Knob underneath seat adjusts angle and ease with which chair.
I. J. 2 PCS. 18 PCS. 8 PCS. 2 PCS. K. 1 PC. 2 PCS. 1 PC. 1 PC. MAX. 10A 125V. TABLE TOP NOT ... Look for visible damages on cables, control box and columns. Damaged parts ... Not all columns move when you move the table downwards.
Put down the lever (A), Random lean back will cause the chair seat to tilt backwards, Raise the lever (A) to lock the chair back and seat at random position.
Please take the packaging carton apart, take out the product and place it on the table. Technical Data kg. A. B kg. â¤. 2 kg. 4.4 lbs. +. â¤. â¤. Please do not exceed the maximum bearing weight. WARNING. B. A. A. 35.04 in. 890 mm. 5.91 - 19.69 in.
A.Seat height adjustment. To raise the seat height, stand up from the chair while lifting the lever (A) under the right side of the seat. To lower the seat height, lift ...
reclines to the different weights and strengths of different users. To increase tension turn knob to the right. To release tension (loosen), turn knob to the left. A. A.
by the original owner of the Alera® product in question. Exclusions: ... Normal wear and tear, which are to be expected over the course of ownership. Modifications or ... Please allow a reasonable amount of time for these activities. ... and to ensur
6x10mm. ¢6.5x¢13X2. 4x4mm. 5x5mm. Tapa del tubo. Placa de la TV. 1. 1. 1. 1 ... La mesa o superficie de montaje debe poder soportar el peso combinado del ...
Pull lever(A), on the right side of the seat away from the chair and lean back to recline. To lock chair in upright position, push lever back towards the chair.
reclines to the different weights and strengths for different users. To increase tension, turn knob (B) to the right. To release tension. (loosen), turn knob (B) to the left. C.Tilt Lock. Pull lever(A), on the right side of the seat away from the cha
approximately 70-100 cubes in a 24-hour period, depending on freezer .... drill) during installation, be sure the device is double insulated or grounded in a ...
Use the TIMER key to set the time for a massage. One click can add 1 minute, and the time range is. 1-30 minutes. Once the time has completed, the massage will stop automatically. 4. UPPER BACK, LOWER BACK, FULL BACK buttons will allow you to adjust
ments from door frames, etc., to ensure the exact same pattern on both sides. Once you're .... Exotic Real Wood. ⢠Carbon Fiber. ⢠Machined Plastic. For more ...
the seat. To lower the seat height, lift the lever (A) while sitting in the chair. ... Ayuda del producto y partes / Support technique et pieces. E. A. B. C. D. F. G. H. I. K.
If the test caus- es no damage, you're ready to mask your trim colors. Because you must mask each trim color individually, most builders create a design with no.
refrigerators are still dangerous even if they will sit ..... Cut a notch in the top front corner as shown to allow .... Re-use the corner posts from the packaging to.