How To Recover(Update) NTD37HD through Network

... type of a router, you can connect NTD37HD as many as router's Ethernet port. Setting. STEP1 - PC setting. Fix the IP address(Static IP). IP ADD : 192.168.1.16.
432KB taille 9 téléchargements 299 vues
How To Recover(Update) NTD37HD through Network Equipment required. At least 2 Straight LAN cables A window based PC A router TFTP Desktop software Firmware (romfs.bin file). Before starting upgrade, make the connection as below picture. According to type of a router, you can connect NTD37HD as many as router’s Ethernet port.

Setting STEP1 - PC setting Fix the IP address(Static IP) IP ADD : 192.168.1.16 Subnet : 255.255.255.0

STEP2 – Making a folder and copy a firmware file into the folder Make a Folder named “tftboot” on C hard disk drive. Copy a firmware(romfs.bin) file into tftboot folder on C Drive. STEP3 – Run a TFT Desktop Run “TFT Desktop” program and click Server. Go to “Properties…” and change “Default directory” to C:\tftboot.

STEP4 – Close the window Click the “OK” button and exit. C:\tftboot

STEP5 – Update Starting First, press ‘SETUP’ key of remote controller, and then press ‘GOTO’ button of remote controller.

Remote Controller

STEP6 – LED status during updating The LED around Power Button starts blinking

when

Update

is

started

properly.

STEP7 – Update is completed Once Update is completed successfully, the LED will go out in a moment. And, then the LED will be ON again. The

update

will

take

around

7~8

minutes. Have a good luck !!!!!!! After you recover the dead NTD37 with above method, you need to update NTD37 with latest version firmware again according to normal Firmware Update Procedure in case that the ‘romfs.bin’ file is based on old version firmware.