EHL Consulting

Adsorb spillages onto sand, earth or any suitable adsorbent material. ... These properties are the most relevant and no other properties are available. Form liquid.
127KB taille 46 téléchargements 478 vues
EHL Consulting

EHL LUBASE RME

SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Address/Phone No.:

EHL Consulting 23 avenue de Verdun F 60200 COMPIEGNE Tel : + 33 (0) 3 44 86 96 91 Fax : + 33 (0)3 44 86 96 91

Emergency Phone No.: ORFILA + 33 (0)1 45 42 59 59 Use of Substance / Preparation: Cleaner , Heating fuel 2. HAZARDS IDENTIFICATION EC Classification: Not classified as dangerous according to EC Directive 67/548/EEC. Hazards May cause eye irritation. 3. COMPOSITION/INFORMATION ON INGREDIENTS PRODUCT DESCRIPTION:

Fatty acid methyl ester

CAS No. 067762-38-3 EC No : 267-015-4 HAZARDOUS INGREDIENT(S) Contains no Hazardous Ingredients in accordance with EC Directive 2001/58/EC. 4. FIRST-AID MEASURES Inhalation Remove patient from exposure, keep warm and at rest. Obtain medical attention if ill effects occur. Skin Contact Remove contaminated clothing. Wash skin with water. If symptoms develop, obtain medical attention. Eye Contact Irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 10 minutes. Obtain medical attention.

Ingestion Do not induce vomiting. Provided the patient is conscious, wash out mouth with water and give 200-300 ml of water to drink. Obtain medical attention. Further Medical Treatment Symptomatic treatment and supportive therapy as indicated. 5. FIRE-FIGHTING MEASURES Low fire hazard. Thermal decomposition will evolve irritant vapours. Extinguishing Media

As appropriate for surrounding materials/equipment.

Hazardous Decomposition Product(s)

Thermal decomposition will evolve irritant vapours.

Fire Fighting Protective Equipment

A self contained breathing apparatus and suitable protective clothing should be worn in fire conditions.

6. ACCIDENTAL RELEASE MEASURES Do not allow to enter drains, sewers or watercourses. Adsorb spillages onto sand, earth or any suitable adsorbent material. Transfer to a container for disposal or recovery. Spillages or uncontrolled discharges into watercourses must be alerted to the Environment Agency or other appropriate regulatory body. 7. HANDLING AND STORAGE 7.1 HANDLING Do not breathe vapour. Avoid inhalation of high concentrations of vapour/mist. Provide adequate ventilation if fumes or vapours are likely to be evolved to ensure that the defined occupational exposure limit is not exceeded. Avoid contact with eyes. Combustion or thermal decomposition will evolve irritant vapours. 7.2 STORAGE For immediate usage. Keep away from heat, hot surfaces and sources of ignition. Avoid high temperatures. Store in original containers. Storage Temperature

ambient.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION Good working practice suggests goggles should be worn. Provide adequate ventilation if fumes or vapours are likely to be evolved. Occupational Exposure Limits No Occupational Exposure Limit Assigned

9. PHYSICAL AND CHEMICAL PROPERTIES These properties are the most relevant and no other properties are available. Form Colour Odour Boiling Point (Deg C) Flash Point (Deg C) Open cup Vapour Pressure (Pascals) Density (g/ml) Solubility (Water) Solubility (Other) Partition coefficient (n-Octanol/water) Cloud Point

liquid pale yellow faint >200 185 (C.O.C) 3 (estimated)