Clé de contact Toyota Corolla Phare buzzer disable - PDFHALL.COM

Vous pouvez démonter le tableau de bord pour une solution plus propre, mais attention, le buzzer est lié à l'ECU de sorte que toute modification de circuit ...
451KB taille 3 téléchargements 51 vues
Toyota Corolla Headlight/ignition key buzzer disable

Toyota Corolla Headlight/ignition key buzzer disable Disable the buzzer that warns of keys in ignition/lights on when you open the door.

Written By: bt1993

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 4

Toyota Corolla Headlight/ignition key buzzer disable

INTRODUCTION Warning: You can disassemble the instrument cluster for a neater solution, however beware, the buzzer is linked to the ECU so any electrical circuit modifications like actually disconnecting the buzzer could lead to a ECU malfunction.

TOOLS: Phillips #1 Screwdriver (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 4

Toyota Corolla Headlight/ignition key buzzer disable

Step 1 — Toyota Corolla Headlight/ignition key buzzer disable



Start by removing the hood over the instrument cluster. Pull the hood straight out towards the steering wheel.

Step 2



After removing the hood, undo the four screws securing the instrument cluster and pull forward.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 4

Toyota Corolla Headlight/ignition key buzzer disable

Step 3



The buzzer is accessed through a grill in the bottom of the instrument cluster/combination meter. Simply poke a sharp object into the grill and mash up the speaker dome to neutralize the buzzer!

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-09-29 03:24:02 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 4