Bose SoundLink Couleur Président Remplacement - PDFHALL.COM

21 juin 2017 - Pour ce guide, une rupture presque complète du dispositif sera nécessaire. Cela comprend l' enlèvement de l'enveloppe extérieure et le circuit de bord, ainsi que d' un peu de soudure. OUTILS: Phillips # 0 Tournevis (1). Métal spudger (1). IFixit Toolkit Pro Tech (1). Inviolable Bit Torx Plus TR (1). Station de ...
3MB taille 79 téléchargements 184 vues
Bose SoundLink Color Speaker Replacement

Bose SoundLink Color Speaker Replacement Replace the speakers in your Bose SoundLink Color.

Written By: Brett Horstketter

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 1 of 7

Bose SoundLink Color Speaker Replacement

INTRODUCTION For this guide, an almost complete breakdown of the device will be required. This includes removal of the outer casing and the circuit-board, as well as a bit of soldering.

TOOLS: Phillips #0 Screwdriver (1) Metal Spudger (1) IFixit Pro Tech Toolkit (1) Tamper Resistant TORX Plus TR Bit (1) Soldering Station (1) Spudger (1)

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 2 of 7

Bose SoundLink Color Speaker Replacement

Step 1 — Outer Casing

 Four round, plastic plugs are located on the back of the device. 

Using a metal spudger, carefully pry up the plastic covers.

 The covers are all glued on, so be careful not to scar the casing when prying them off. If possible, use a spudger or plastic opening tool to remove them.

Step 2



Remove the four 1.8 cm Torx Plus TR screws from the outer case.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 3 of 7

Bose SoundLink Color Speaker Replacement

Step 3



Carefully open up the casing.

 The top button pad may need to be re-glued upon installing the new casing. Step 4 — Speaker



Lift up the retaining flap on the button cable ZIF connector.



Pull the button cable straight out of the connector.



Remove the inner assembly.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 4 of 7

Bose SoundLink Color Speaker Replacement

Step 5

 The speakers are on the front of the inner assembly. 

Using the Phillips head screwdriver, unscrew the four 1.3 cm screws holding the speaker that will be replaced.

Step 6

 Three screws hold the printed circuit board. 

Using the Phillips head screwdriver, unscrew the three 1.2 cm screws.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 5 of 7

Bose SoundLink Color Speaker Replacement

Step 7



Desolder each the three pins connecting the speaker to the motherboard.



Carefully lift the motherboard with a spudger to ensure that each pin desolders.

 Work carefully. Prying too hard may cause damage to the board. Step 8 

© iFixit — CC BY-NC-SA

www.iFixit.com

Push the speaker through the front of the inner assembly.

Page 6 of 7

Bose SoundLink Color Speaker Replacement

To reassemble your device, follow these instructions in reverse order. This document was last generated on 2017-10-02 10:40:25 PM.

© iFixit — CC BY-NC-SA

www.iFixit.com

Page 7 of 7