CONTACT US: 250.338.4949 Monday-Friday 8am-5pm P.S.T. [email protected] 4875 North Island Hwy., Courtenay, B.C., Canada V9N 5Y9

Phorle: Model PERL The PERL is built upon a strong foundation. • • • • •

Over twelve years of research and development Ease of use, currently has automated 25 protocols with room for more. Manual operation Effective, safe, reliable and compact Roll-along, hard body transport case available

Shipped Contents • PERL - "State of the art enclosed resonant light emission device" • ProGen II 4050 - "Pre-programmed” automated frequency generator • Operator's Manual plus selective literature Warranty and Technical Support • 1 year parts and labour (shipping not included) • Free consultation for owner by – phone, fax or email during business hours Technical Specifications • Size: 13" W x 5.5" H x 17" L • Weight: 18 pounds (approx) • Power: Built to either 110/120 or 220/240 VAC • Case: Heavy gauge aluminum • Calibration: Factory set to 125 input watts +/- 5% @ 2200 Hz. SWR: 1.5 or less • Tube: leaded glass, 100% Argon • Tube Output: average 70 watts • Tube Ignition: Instantaneous (low temperatures and non-use may affect lighting) • Power consumption: less than 15 amps – requires dedicated (not shared) outlet • Chronometer: External • Device Hour rating: 3000 + (conditional upon humidity, dust, power supplied) • Frequency Output: .001 to 28,000 Hz square wave • Frequency Carrier: 27,125,000 Hz (+/- 2000 Hz) • 120 or 240 VDC Device Safety • Electrical: Overheat, voltage, polarity: Fused • Minimum recommended safe operating distance: 3 feet (1.2M) • Effective Range: Up to 30 feet

Special Provisions • Use requires adequate “grounding” • Minimum of 15 amps dedicated AC power @ 60cps Miscellaneous Information • May be used with other frequency generators* • May be used for Multiple Signaling* by using more than one frequency generator at a time to minimize exposure time or to deliver more than one protocol simultaneously * Special instructions required

Details $5,695.00 Shipping, handling, insurance and applicable taxes are extra. Weighs 18 lbs.

PROGEN II 4050 Programmable Frequency Generator $895.00

Value • This is the best buy in the industry because of its accuracy and what it can do. Many computerized signal output systems cannot provide the voltage needed for real effectiveness, whereas the ProGen 4050 has this ability. Reliability • RF Resistant • Durable metal encasing Versatility • Primarily designed to deliver frequencies into our Photon Resonant Light Emission Systems. Also ideal for HandHeld and FootPlate Contacts and Light Emitting Diodes (LED’s) • 40 banks with 50 levels in each bank • Capable of storing 38,000 individual frequencies for automated use • Uses single frequencies, sweeps (increasing or decreasing) and spreads (expanding or contracting) • Run banks consecutively • Select Sine, Triangle and Square wave • Duty cycle may be selected from 10% to 90% • Load frequencies from .001 Hz to 999,999 Hz • Six digits with up to 3 decimal places i.e. 456.123 • Run each frequency anywhere from 1 second to 59 minutes and 59 seconds • Pause and resume feature at any stage in a program. • Output polarity: positive, positive/negative or negative • Pulse from 0 to 9 per second • Safety feature-4 pin DIN connector. When used to power the ProGen II, it overrides the BNC output, eliminating the possibility of damage to the PERL by defaulting to the manufacturer’s preset 1.5V. Features • Monitors and continuously displays status of active program on bold two line lighted LED showing bank, level, frequency and time remaining • Adjustable output from 0.1-12 Volts DC • Accurate to