2260 MT (English) CCI 2 PAGES MSDS OK (MT) 2

Section 3: Physical Data. Section 9: Other Information. 24 HOUR ... N4335 Temkin Rd. Columbus, WI 53925 ... 0.3 kPa (0.03 mmHg) (at 20°C). Not available. 3.4.
160KB taille 7 téléchargements 359 vues
Material Safety Data Sheet

Section 1: Company and Product Identification Manufactured by: Columbus Chemical Industries, Inc. N4335 Temkin Rd. Columbus, WI 53925 TEL: (920) 623-2140

24 HOUR EMERGENCY ASSISTANCE CHEMTREC 800-424-9300

4- EXTREME 3- SEVERE 2- MODERATE 1- SLIGHT 0- MINIMAL

(866) 260-0501

2

FLAMMABILITY

0

REACTIVITY

0

Material UsesFertilizer.

9705606 Product No. 7664-38-2 CAS Section 2: Hazardous Ingredients

Synonyms Formula

LD50/LC50

Effects of Overexposure

Conc (%)

PIN

1) Phosphoric Acid*

7664-38-2

85

UN1805

2) Water (Non-Hazardous)

7732-18-5

15

N/A

Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe skin irritation. Repeated or prolonged exposure to spray mist may produce respiratory tract irritation leading to frequent attacks of bronchial infection. FIRST AID: SKIN: Wash contaminated skin with soap and water. EYES: Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Seek medical attention. INHALATION: Move exposed person to fresh air. If irritation persists, get medical attention. INGESTION: Do not induce vomiting. If affected person is conscious, give plenty of water to drink. Seek medical attention.

Section 6: Reactivity Data Stability

The product is stable.

Incompatibility

Reactive with metals, alkalis.

Instability Temp. Not available.

Degradation Prod. These products are phosphates. Materials to Avoid Not available.

For Exposure Limits (TLV, PEL), LD50 and LC50 see section 5 of this document.

Section 3: Physical Data Liquid.

Odor Threshold

Not available.

Color

Colorless.

Vapor Pressure

0.3 kPa (0.03 mmHg) (at 20°C)

Odor

Odorless.

Not available.

Specific Gravity (Water = 1) Melting Point

1.5 to 1.7 (Water = 1)

Boiling Point

213°C (415°F)

Evaporation Rate (Reference solvent) Vapor Density (Air = 1) Percent Volatile by Volume pH (1% water soln)

Water/Oil Dist. Coeff.

Not available.

Solubility

Miscible in water.

3.4

Not available.

Autoignition Temp.

Not applicable.

Explosion Hazard

Not available.

Haz. Comb. Prod.

Not applicable.

Means of Extinction

Use extinguishing media suitable for surrounding materials.

Special Fire Fighting Procedures

Fire fighters should wear positive pressure self-contained breathing apparatus (SCBA) and full turnout gear. Unusual Fire and Explosion Hazards Not available.

Will not occur.

Section 7: Spill or Leak Procedures

Spill

Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container.

Disposal

Waste must be disposed of in accordance with federal, state and local environmental control regulations.

0% (v/v). 0% (w/w).

Section 4: Fire and Explosion Hazard Data

Flash Point Not applicable. (Methods) Flammable Limits Not applicable. in Air by Volume Flammability Not applicable.

Hazardous polymerization?

* Chemical subject to the reporting of SARA Title III.

Appearance

42°C (108°F)

LD50: Oral Rat: 1530 mg/kg LC50: Not available.

Emergency and First Aid Procedures

Not available. H3PO4

CAS

PEL/TWA: 1 mg/m3 from OSHA (United States). STEL: 3 mg/m3 from OSHA (United States). Period: 8 hour(s). TLV/TWA: 1 mg/m3 from ACGIH (United States). Hazardous in case of skin contact (corrosive, irritant), of eye contact (corrosive). Skin contact may produce burns.

Routes of Entry Eye contact. Skin Contact

HAZARD RATING HEALTH

Product Name Phosphoric Acid

Product Name

Section 5: Health Hazard Data

Exposure Limits (P.E.L., TLV, etc.) Acute Effects

Section 8: Protection Equipment Information

Equipment

Face shield. Synthetic apron. Gloves.

Engineering Controls

Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective threshold limit value.

Section 9: Other Information Special Precautions

Immediately contact emergency personnel. Eliminate all ignition sources. Keep unnecessary personnel away. Use suitable protective equipment (Section 8). Follow all fire fighting procedures (Section 4). Do not touch or walk through spilled material.

Read label on container before using. Do not wear contact lenses when working with chemicals.

Verified by S. Quandt

Effective Date Printed 10/14/2002

For laboratory use only. Not for drug, food or household use. Keep out of reach of children. The information contained herein is furnished without warranty of any kind. Employers should use this information only as a supplement to the other information gathered by them and must make independent determination of suitability and completeness of information from all sources to assure proper use of these materials and the safety and health of employees.

Fiche signalétique

Section 5: Données sur les risques pour la santé Limites d'exposition (P.E.L., TLV, etc.)

PEL/TWA: 1 mg/m3 de OSHA (États-Unis). STEL: 3 mg/m3 de OSHA (États-Unis). Période: 8 heure(s). TLV/TWA: 1 mg/m3 de ACGIH (États-Unis). Dangereux en cas de contact cutané (corrosif, irritant), contact avec les yeux (corrosif). Le contact avec la peau peut Effets aigus provoquer des brûlures. Voies d'entrées Contact avec les yeux. Contact avec la peau DL50: Oral Rat: 1530 mg/kg DL50/CL50

Section 1: Identification de la compagnie et du produit

ASSISTANCE D'URGENCE 24 HEURES CHEMTREC 800-424-9300

Manufactured by: Columbus Chemical Industries, Inc. N4335 Temkin Rd. Columbus, WI 53925 TEL: (920) 623-2140

NIVEAU DE DANGER SANTÉ

4- EXTRÊME 3- SÉVÈRE 2- MODÉRÉ 1- FAIBLE

0- MINIMAL

(866) 260-0501

2

INFLAMMABILITÉ

0

RÉACTIVITÉ

0

Nom du produit Acide phosphorique

Utilisations

No. de produit 9705606 7664-38-2 CAS Section 2: Ingrédients dangereux

Synonymes Non disponible. Formule H3PO4

Nom du produit

Fertilisant.

Conc (%)

CAS

NIP

1) Acide phosphorique*

7664-38-2

85

UN1805

2) Eau (Non dangereux)

7732-18-5

15

S/O

CL50: Non disponible.

Effets d'une surexposition

Une exposition répétée ou prolongée au brouillard peut entraîner une irritation chronique des yeux ou une grave irritation de la peau. Une exposition répétée ou prolongée au brouillard peut entraîner une irritation des voies respiratoires conduisant à de fréquentes infections des bronches. Mesures d'urgence et de premiers soins

PREMIERS SOINS: PEAU: Laver la peau contaminée à l'eau et au savon. YEUX: Rincer immédiatement à l'eau courante pendant au moins 15 minutes, en soulevant occasionnellement les paupières supérieure et inférieure. Consulter un médecin. INHALATION: Transporter la personne incommodée à l'air frais. Si l'irritation persiste, consulter un médecin. INGESTION: NE PAS faire vomir. Si la personne incommodée est consciente, lui faire boire beaucoup d'eau. Consulter un médecin.

Section 6: Données sur la réactivité

Temp. d'instabilité

Stabilité

Le produit est stable.

Incompatibilité

Réactif avec les métaux, les alcalis.

Non disponible. Polymérization dangereuse?

Prod. dégradation Ces produits sont des phosphates. Pour les limites d'exposition (TLV, PEL), DL50 et CL50 voir la section 5 de ce document.

Section 3: Données physiques

* Chemical subject to the reporting of SARA Title III.

Apparence

Liquide.

Seuil de l'odeur

Couleur

Incolore.

Tension de vapeur 0.3 kPa (0.03 mmHg) (à 20°C)

Odeur

Inodore.

Taux d'évaporation (Solvant de référence)

Gravité spécifique 1.5 à 1.7 (Eau = 1) (Eau 1) Point de fusion 42°C (108°F)

Non disponible.

Point d'ébullition

213°C (415°F)

Coeff. dist. eau/huile

Non disponible.

Solubilité

Point d'éclair (Méthodes)

Sans objet.

Inflammabilité

Sans objet.

Miscible dans l'eau.

Section 4: Données sur les dangers de feu et d'explosion

Limites d'inflammabilité Sans objet. dans l'air par volume

Non disponible.

Déversement

Diluer avec de l'eau et absorber avec une vadrouille, ou absorber avec une substance inerte sèche et mettre dans un contenant de récupération approprié.

Élimination

Les déchets doivent être éliminés conformément aux règlements fédéraux, provinciaux et municipaux sur la protection de l'environnement.

Section 7: Procédures en cas de déversement

Non disponible.

Densité de vapeur 3.4 (Air = 1) Pourcentage 0% (v/v). 0% (p/p). volatile en volume pH (1% soln/eau) Non disponible.

Temp. d'autoinflammation

Ne se produira pas.

Substances à éviter

Sans objet.

Section 8: Information sur l'équipement de protection Équipement

Masque facial. Tablier en matière synthétique. Gants.

Contrôles d'ingénierie

Une ventilation par aspiration à la source ou d'autres systèmes de contrôle technique sont recommandés pour maintenir les concentrations des vapeurs inférieures aux limites.

Section 9: Autre information Risques d'explosion

Non disponible.

Prod. comb. dang. Sans objet. Moyens d'extinction

Contacter immédiatement le personnel d'urgence. Éliminer toutes les sources d'inflammation. Garder le personnel non requis éloigné. Utiliser un équipement de protection adéquat (Section 8). Suivre toutes les procédures relatives à la lutte contre les incendies (Section 4). NE PAS TOUCHER ni marcher dans le produit répandu.

Utiliser des agents extincteurs appropriés pour les matières environnantes.

Procédures spéciales d'extinction d'incendie

Les pompiers doivent porter un appareil respiratoire autonomeà pression positive et une tenue de feu complète. Dangers de feu et d'explosion inhabituels Non disponible.

Précautions spéciales

Lire l'étiquette sur le contenant avant l'usage. Ne pas portez de verres de contact lorsque vous utilisez des produits chimiques.

Vérifié par S. Quandt

Date effective Imprimé le 10/14/2002

Pour usage de laboratoire seulement. Pas pour usage de drogue, aliment ou pour la maison. Gardez hors de la portée des enfants.. L'information contenue dans ce document est fournie sans garantie d'aucune sorte. Les employeurs doivent utiliser cette information seulement en supplément à d'autres informations qu'ils doivent obtenir. Ils doivent faire leur propre détermination et vérifier si l'information est pertinente et complète en se basant sur toutes les autres sources disponibles et s'assurer de l'utilisation adéquate de ce produit et de la santé et de la sécurité de leurs employés.