Test Report No Dated
70.452.15.1185.01 2015-04-03 ORIGINAL
Applicant: Address: Product Name: Style No.: Labelled Age Range: Requested Age Range: Age Range for Testing: Receipt Date of Sample: Date of Testing: Sample Submitted: Test Result:
BESTWAY INFLATABLES & MATERIAL CORP. NO. 3065 CAO AN ROAD, SHANGHAI, CHINA Frosted Neon Swim Ring 36025 10+ 10+ Over 10 years 2015-04-01 2015-04-01 to 2015-04-03 The sample(s) was (were) submitted by applicant and identified. Refer to the data listed in following pages
Test Specification:
Conclusion:
1.
EN 71-1:2014 Mechanical and Physical Properties
Pass
2.
EN 71-2:2011+A1:2014 Flammability
Pass
3.
Labelling Requirement (Washing/Cleaning Label, CE Mark, Importer / Manufacturer Mark (Name, Address, Product Identification)) According to the Directive 2009/48/ECSafety of Toys
Pass
4.
EN 71-3:2013+A1:2014 Migration of certain elements
Pass
TÜV SÜD Certification and Testing (China) Co.,Ltd. Shanghai Branch
Tested by:__________________ Jerry Chen Senior Test Engineer
Checked by: _________________ Celia Zhang Supervisor
Note: (1) General Terms & Conditions as mentioned overleaf, (2) The results relate only to the items tested, (3) The test report shall not be reproduced except in full without the written approval of the laboratory. Laboratory: TÜV SÜD Certification and Testing (China) Co.,Ltd. Shanghai Branch Testing Center Hardgoods Laboratory
Phone : +86 21 60376300 Fax : +86 21 60376350 www.tuv-sud.cn
Regd. Office: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch TÜV SÜD China No.88 Heng Tong Road Shanghai 200070 P.R. China
Page 1 of 5
Test Report No Dated
70.452.15.1185.01 2015-04-03 ORIGINAL
Description of the Tested Subject Sample
Description
A
Frosted Neon Swim Ring
Specimen Description: 001 Transparent light blue soft plastic 002 Transparent light green soft plastic 003 Transparent light pink soft plastic
Laboratory: TÜV SÜD Certification and Testing (China) Co.,Ltd. Shanghai Branch Testing Center Hardgoods Laboratory
Phone : +86 21 60376300 Fax : +86 21 60376350 www.tuv-sud.cn
Photo
004 005
Black coating (warning) Transparent soft plastic valve
Regd. Office: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch TÜV SÜD China No.88 Heng Tong Road Shanghai 200070 P.R. China
Page 2 of 5
Test Report No Dated
70.452.15.1185.01 2015-04-03 ORIGINAL
Test Results 1. EN 71-1:2014 Mechanical and Physical Properties Clause
Requirement
4 General requirements 4.1 Material cleanliness 4.3 Flexible plastic sheeting 4.7 Edges 4.8 Points and metallic wires 4.18 Aquatic toys and inflatable toys 6 Packaging 7 Warnings and instructions for use 7.1 General 7.2 Toys not intended for children under 36 months 7.4 Aquatic toys Abbreviation: P=pass;
Evaluation P P P P P P P P P
Note: Only applicable clauses were shown.
2.
EN 71-2:2011+A1:2014 Flammability of Toys
Clause 4.1 General requirement Abbreviation: P=pass;
Requirement
Evaluation P
Note: Only applicable clauses were shown.
Laboratory: TÜV SÜD Certification and Testing (China) Co.,Ltd. Shanghai Branch Testing Center Hardgoods Laboratory
Phone : +86 21 60376300 Fax : +86 21 60376350 www.tuv-sud.cn
Regd. Office: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch TÜV SÜD China No.88 Heng Tong Road Shanghai 200070 P.R. China
Page 3 of 5
Test Report No Dated
70.452.15.1185.01 2015-04-03 ORIGINAL
3.
Labelling requirement (Washing/Cleaning Label, CE mark, importer / manufacturer mark (name, address, product identification)) according to the Directive 2009/48/EC-Safety of toys Result (On Product)
Result (On Package)
Present (dimension:15mm)
Present (dimension:10mm)
Manufacturer’s Name and Address
Present
Present
Importer’s Name and Address
Present
Present
Product Identification
Present
Present
CE mark
The following marking shall be fulfilled. -The CE marking shall be affixed visibly, legibly and indelibly to the toy, to an affixed label or to the packaging, in counter display which shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008. -The manufacturer’s name and address, importer’s name and address in EEC shall be indicated on the toy or, where that is not possible, on its packaging or in a document accompanying the toy. -The toys bear a type, batch, serial or model number or other element allowing their identification, or where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy. Note: Only applicable clauses were shown.
Laboratory: TÜV SÜD Certification and Testing (China) Co.,Ltd. Shanghai Branch Testing Center Hardgoods Laboratory
Phone : +86 21 60376300 Fax : +86 21 60376350 www.tuv-sud.cn
Regd. Office: TÜV SÜD Certification and Testing (China) Co., Ltd. Shanghai Branch TÜV SÜD China No.88 Heng Tong Road Shanghai 200070 P.R. China
Page 4 of 5
Test Report No Dated
70.452.15.1185.01 2015-04-03 ORIGINAL
4.
EN 71-3:2013+A1:2014 Migration of certain elements Test with reference to EN 71 – Part 3:2013+A1:2014 TEST ITEM Soluble Aluminum Soluble Antimony Soluble Arsenic Soluble Barium Soluble Boron Soluble Cadmium Soluble Chromium III Soluble Chromium VI Soluble Cobalt Soluble Copper Soluble Lead Soluble Manganese Soluble Mercury Soluble Nickel Soluble Selenium Soluble Strontium Soluble Tin Organic Tin Soluble Zinc
Remark:
Limit in scraped-off MDL [mg/kg] toy material [mg/kg] 70000 5.0 560 5.0 47 2.5 18750 5.0 15000 5.0 17 5.0 460 0.2 0.2 0.2 130 5.0 7700 5.0 160 5.0 15000 5.0 94 5.0 930 5.0 460 5.0 56000 5.0 180000 5.0 12 5.0 46000 5.0 Conclusion
001